Our roller garage doors service in Derby
Roller garage doors suit driveways in Derby where an up-and-over door would swing out into the space, because the curtain rolls straight up into a box.
Width, height and the headroom behind the lintel decide the door size; the survey in Derby checks all three, plus where the motor can be powered.
Derby is part of our Derbyshire coverage, and addresses in the city's postcode districts are covered in the same way as the rest of Derbyshire. We also cover Belper, Ilkeston and Heanor, so premises in more than one of these places can be quoted together.
Specifying roller garage doors for Derby
What you can choose when we survey in Derby:
- FinishStandard colours and woodgrains; vision or vent laths available.
- SafetySafety edge or photocells, soft start and stop, and an internal manual release.
- ControlHand-held remotes, wall switch, keypad, or app via a smart hub.
Guide prices for roller garage doors in Derby
| Roller garage doors | Inc VAT | Ex VAT |
|---|---|---|
| Single garage up to 2,500 × 2,200 mm, insulated, electric | £1,395 – £2,195 | £1,160 – £1,830 |
| Double garage up to 5,000 × 2,200 mm, insulated, electric | £2,195 – £3,495 | £1,830 – £2,910 |
| Removal and disposal of an old up-and-over door | £95 – £195 | £80 – £160 |
Guide prices, per door, supplied and fitted. VAT at 20% where it applies.
Use these as a starting point for budgeting in Derby; the written quotation after survey is the price that counts.
What to check in Derby before ordering
As an English city, Derby follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Safety devices: Powered doors need force limiting or a safety edge and must be set up and tested at installation. We hand over the instructions and a record of the settings.
- Planning: Replacing a garage door is not usually a planning matter, but listed buildings and conditions on newer estates can restrict changes, so check if unsure.
- Power cut: Every powered door has a manual release so it can be opened by hand. If the garage is your only way into the house, ask about battery backup.
From survey to fitting
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Survey at the property
A surveyor measures, checks what the box and guides will fix to, and talks through options.
Fixed written price
You get a quotation listing the shutter, controls, fitting and lead time.
Made, fitted, handed over
Your shutter is made to measure, fitted, set up and demonstrated.
Frequently asked questions
Can a roller door replace my up-and-over door?
Yes. It fits the same opening, usually behind it on the inside, and gives you back the full width and the ceiling space.
Are roller garage doors insulated?
The doors we recommend use foam-filled aluminium laths, which reduce heat loss and noise compared with a single-skin steel up-and-over door.
Do you cover Derby?
Yes, we survey and fit in Derby (DE postcodes) as part of our Derbyshire coverage.
Is the survey free in Derby?
For new shutters, yes. Repair visits in Derby are charged because they include diagnosis and work on the day.