What is roller shutter motor replacement?
Signs of a failing motor include a shutter that hums but does not move, stops part way, runs slowly, overheats and cuts out, or loses its limit settings. Some of these are control faults rather than motor faults, so we test before replacing anything.
Domestic shutters use tubular motors inside the barrel; shop shutters often use a tube motor or an external drive; industrial doors use a side-mounted gear motor. We match the torque and the barrel size and, where possible, the existing controls.
Replacement is also a good moment to add remotes, timers or smart control.
What does the work cover?
- DomesticTubular motors for window, door and garage shutters.
- ShopTube motors or external drives with key switch.
- IndustrialDirect-drive gear motors with emergency hand operation.
Typical specification
| Matched to | curtain weight, barrel size and duty |
|---|---|
| Includes | limit setting and safety checks |
| Info we need | photos of the box, motor label and controls |
How much does roller shutter motor replacement cost?
| Roller shutter motor replacement | Inc VAT | Ex VAT |
|---|---|---|
| Domestic tubular motor | £295 – £595 | £245 – £495 |
| Shop or commercial tube motor | £715 – £1,435 | £595 – £1,195 |
| Industrial side-mounted gear motor | £1,075 – £2,275 | £895 – £1,895 |
Guide prices, per motor, supplied and fitted. VAT at 20% where it applies.
The visit cost is agreed when you book, and any parts or extra work are priced and approved by you first. See all roller shutter prices or use the quote tool for a guide range.
What should you check first?
- Electrical work: Motors are wired to BS 7671; any change to the supply is done by a qualified electrician.
How does the process work?
Send photos and details
Tell us what the shutter is doing, roughly how big it is and what make it is, with photos of the shutter, box and any labels.
Visit and diagnosis
An engineer checks the shutter, controls and safety devices, finds the cause and explains the options.
Cost agreed first
The visit cost is agreed when you book, and any parts or extra work are priced and approved by you before we do them.
Fixed, tested, reported
We complete the work, test the shutter and leave a short written record of what was found and done.
Questions about roller shutter motor replacement
How do I know if my shutter motor has failed?
If the shutter hums but does not move, stops part way, or does nothing when the power and switch are fine, the motor or its limits are the likely cause. We test before replacing.
Can I replace the motor without replacing the shutter?
Yes, in most cases. The motor slides out of the barrel or unbolts from the side.
How much does a new shutter motor cost?
A domestic tubular motor is usually £295–£595 including VAT fitted (£245–£495 plus VAT); commercial and industrial motors cost more depending on size and duty.
