Fitting roller garage doors in Ashford (Kent)
For reference, Ashford (Kent) lies about 18 miles south-east of Maidstone.
When an up-and-over door in Ashford (Kent) is replaced, the old door and frame come out and the new roller door is fixed to the brickwork or a timber subframe.
Width, height and the headroom behind the lintel decide the door size; the survey in Ashford (Kent) checks all three, plus where the motor can be powered.
If your address has a TN24 postcode, it falls within our Kent coverage. Faversham, Canterbury and Folkestone are covered too, which helps when several properties need doing.
Options for roller garage doors in Ashford (Kent)
Decisions we make with you at the survey in Ashford (Kent):
- Laths77 mm foam-filled aluminium for most single and double doors.
- FinishStandard colours and woodgrains; vision or vent laths available.
- SafetySafety edge or photocells, soft start and stop, and an internal manual release.
Guide prices for Ashford (Kent)
| Roller garage doors | Inc VAT | Ex VAT |
|---|---|---|
| Single garage up to 2,500 × 2,200 mm, insulated, electric | £1,395 – £2,195 | £1,160 – £1,830 |
| Double garage up to 5,000 × 2,200 mm, insulated, electric | £2,195 – £3,495 | £1,830 – £2,910 |
| Removal and disposal of an old up-and-over door | £95 – £195 | £80 – £160 |
Guide prices, per door, supplied and fitted. VAT at 20% where it applies.
These are UK guide prices for supply and fit. Your price in Ashford (Kent) is fixed in writing after survey.
Rules that apply in Ashford (Kent)
Ashford (Kent) is in England, so planning decisions sit with your local planning authority (the district, borough, city or unitary council).
- Planning: Replacing a garage door is not usually a planning matter, but listed buildings and conditions on newer estates can restrict changes, so check if unsure.
- Safety devices: Powered doors need force limiting or a safety edge and must be set up and tested at installation. We hand over the instructions and a record of the settings.
- Power cut: Every powered door has a manual release so it can be opened by hand. If the garage is your only way into the house, ask about battery backup.
From survey to fitting
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
One clear quotation
Everything included is listed, and nothing is ordered until you accept.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Roller garage doors in Ashford (Kent): questions
Can a roller door replace my up-and-over door?
Yes. It fits the same opening, usually behind it on the inside, and gives you back the full width and the ceiling space.
How long does fitting take?
Most single doors are fitted in a day, including removing the old door and setting up the safety devices.
Is the survey free in Ashford (Kent)?
Yes, for new installations. We tell you the cost of any repair or service visit before booking.
Do you cover Ashford (Kent)?
Yes. Ashford (Kent) and the TN24 postcode district are part of our coverage across Kent.