Roller garage doors in Dartford
We survey and install across Kent, and Dartford is one of the towns covered. Neighbouring towns we cover include Bexley (3 miles away), Swanley and Welling.
For reference, Dartford lies about 18 miles north-west of Maidstone.
When an up-and-over door in Dartford is replaced, the old door and frame come out and the new roller door is fixed to the brickwork or a timber subframe.
If your garage in Dartford is integral, the door affects how warm the house is, so insulated laths and brush seals are worth considering.
Specifying roller garage doors for Dartford
The main choices for roller garage doors in Dartford:
- Fitting positionBehind the opening inside the garage, or face-fixed outside where inside space is tight.
- FinishStandard colours and woodgrains; vision or vent laths available.
- SafetySafety edge or photocells, soft start and stop, and an internal manual release.
Guide prices for roller garage doors in Dartford
| Roller garage doors | Inc VAT | Ex VAT |
|---|---|---|
| Single garage up to 2,500 × 2,200 mm, insulated, electric | £1,395 – £2,195 | £1,160 – £1,830 |
| Double garage up to 5,000 × 2,200 mm, insulated, electric | £2,195 – £3,495 | £1,830 – £2,910 |
| Removal and disposal of an old up-and-over door | £95 – £195 | £80 – £160 |
Guide prices, per door, supplied and fitted. VAT at 20% where it applies.
Guide prices only: access, fixings, power and finish at your property in Dartford can move the figure up or down, and the survey settles it.
What to check in Dartford before ordering
Dartford is in England, so planning decisions sit with your local planning authority (the district, borough, city or unitary council).
- Planning: Replacing a garage door is not usually a planning matter, but listed buildings and conditions on newer estates can restrict changes, so check if unsure.
- Power cut: Every powered door has a manual release so it can be opened by hand. If the garage is your only way into the house, ask about battery backup.
- Safety devices: Powered doors need force limiting or a safety edge and must be set up and tested at installation. We hand over the instructions and a record of the settings.
How it works in Dartford
Tell us about the opening
Use the quote tool or the form: the type of shutter, rough sizes and any photos.
Survey at the property
A surveyor measures, checks what the box and guides will fix to, and talks through options.
Price in writing
A fixed price for the work described, with the lead time stated.
Made, fitted, handed over
Your shutter is made to measure, fitted, set up and demonstrated.
Frequently asked questions
How long does fitting take?
Most single doors are fitted in a day, including removing the old door and setting up the safety devices.
Can a roller door replace my up-and-over door?
Yes. It fits the same opening, usually behind it on the inside, and gives you back the full width and the ceiling space.
Do you cover Dartford?
Yes. Book a survey for any address in Dartford in the usual way; it is covered as part of Kent.
Do I need permission for roller garage doors in Dartford?
Swapping a garage door in the same opening is not usually a planning matter, but some estates have conditions on front elevations and listed buildings need consent. If you are unsure, ask your local council; we provide product details for any application.