Industrial roller shutter doors across County Down
Industrial roller shutter doors across County Down: surveyed, made to measure and fitted, with guide prices below and a fixed price after survey.
We have local pages for 5 towns in County Down, starting with Bangor. Neighbouring areas we also cover include County Antrim, County Armagh, County Tyrone.
High-cycle openings in County Down, such as busy loading bays and forklift routes, are specified with the motor, controls and safety devices to match the traffic.
Towns we cover in County Down include:
- Industrial doors in Bangor
- Industrial doors in Newtownards
- Industrial doors in Newry
- Industrial doors in Banbridge
- Industrial doors in Downpatrick
Options for industrial roller shutter doors in County Down
What you can choose when we survey in County Down:
- WindWind hooks or bars in the laths for exposed openings.
- DriveDirect-drive industrial gear motor with chain or hand-crank emergency operation.
- ControlsHold-to-run, push-button, pull cord, radar, loop or remote.
- CurtainSingle-skin galvanised steel, insulated, or with vision laths.
How much do industrial roller shutter doors cost in County Down?
| Industrial roller shutter doors | Ex VAT | Inc VAT |
|---|---|---|
| Loading door around 4,000 × 4,500 mm, steel, electric | £3,295 – £5,995 | £3,955 – £7,195 |
| Insulated door around 4,000 × 4,500 mm, electric | £4,495 – £7,995 | £5,395 – £9,595 |
| Large opening over 6,000 mm wide | £6,995 – £13,995 | £8,395 – £16,795 |
Guide prices, per door, supplied and fitted. VAT at 20% where it applies.
Guide prices only: access, fixings, power and finish at your property in County Down can move the figure up or down, and the survey settles it.
Rules that apply in County Down
Across County Down, planning follows the Planning Act (Northern Ireland) 2011 and the NI permitted development rules.
- Workplace safety: Powered doors in workplaces must be safe to use and kept maintained; that includes working safety edges or photocells and regular servicing.
- Lifting and access: Large doors are installed with suitable access equipment and a site-specific method statement.
- Power supply: Industrial motors may need a 3-phase supply or a dedicated circuit; we confirm what is on site at survey.
How it works
Tell us about the opening
Use the quote tool or the form: the type of shutter, rough sizes and any photos.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
Fixed written price
You get a quotation listing the shutter, controls, fitting and lead time.
Installation and handover
We fit, test the controls and safety devices, and leave the documents with you.
Industrial roller shutter doors in County Down: questions
How often should an industrial door be serviced?
Most busy doors are serviced every six months, quieter doors annually, so the safety devices and motor are checked regularly.
Should I choose insulated or single-skin?
Insulated if the building is heated or you get condensation; single-skin steel for unheated stores, farms and compounds.
Is the survey free in County Down?
Yes, surveys for new installations in County Down are free. Repair and service visits are charged.
How much do industrial roller shutter doors cost in County Down?
The guide prices above apply in County Down. Your exact price depends on size, finish, controls and access, and is fixed in writing after survey.