Industrial roller shutter doors across Dundee & Angus
From Dundee outwards, we survey and fit industrial roller shutter doors for industrial and commercial sites across Dundee & Angus.
Dundee & Angus covers Dundee City and Angus, and we survey and fit throughout.
We have local pages for 5 towns in Dundee & Angus, starting with Dundee. Neighbouring areas we also cover include Fife, Perth & Kinross, Edinburgh & the Lothians.
Each industrial door is specified for its own opening, so a site in Dundee & Angus gets a door matched to its size, use and power supply rather than a single standard.
Towns we cover in Dundee & Angus include:
- Industrial doors in Dundee
- Industrial doors in Arbroath
- Industrial doors in Carnoustie
- Industrial doors in Forfar
- Industrial doors in Montrose
Which options suit you?
Ways to specify industrial roller shutter doors for Dundee & Angus:
- DriveDirect-drive industrial gear motor with chain or hand-crank emergency operation.
- ControlsHold-to-run, push-button, pull cord, radar, loop or remote.
- CurtainSingle-skin galvanised steel, insulated, or with vision laths.
- WindWind hooks or bars in the laths for exposed openings.
How much do industrial roller shutter doors cost in Dundee & Angus?
| Industrial roller shutter doors | Ex VAT | Inc VAT |
|---|---|---|
| Loading door around 4,000 × 4,500 mm, steel, electric | £3,295 – £5,995 | £3,955 – £7,195 |
| Insulated door around 4,000 × 4,500 mm, electric | £4,495 – £7,995 | £5,395 – £9,595 |
| Large opening over 6,000 mm wide | £6,995 – £13,995 | £8,395 – £16,795 |
Guide prices, per door, supplied and fitted. VAT at 20% where it applies.
Use these as a starting point for budgeting in Dundee & Angus; the written quotation after survey is the price that counts.
Rules that apply in Dundee & Angus
Dundee & Angus is in Scotland, so planning decisions sit with your planning authority (the local council, or a national park authority).
- Workplace safety: Powered doors in workplaces must be safe to use and kept maintained; that includes working safety edges or photocells and regular servicing.
- Lifting and access: Large doors are installed with suitable access equipment and a site-specific method statement.
- Power supply: Industrial motors may need a 3-phase supply or a dedicated circuit; we confirm what is on site at survey.
How it works
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
Fixed written price
You get a quotation listing the shutter, controls, fitting and lead time.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Industrial roller shutter doors in Dundee & Angus: questions
Should I choose insulated or single-skin?
Insulated if the building is heated or you get condensation; single-skin steel for unheated stores, farms and compounds.
How often should an industrial door be serviced?
Most busy doors are serviced every six months, quieter doors annually, so the safety devices and motor are checked regularly.
Is the survey free in Dundee & Angus?
Yes, for new installations. We tell you the cost of any repair or service visit before booking.
Do I need permission for industrial roller shutter doors in Dundee & Angus?
Possibly. New doors on industrial buildings can need planning permission if they change the elevation, and doors in fire compartment walls must suit the fire strategy. We recommend checking with your council first.