Our industrial roller shutter doors service in Pembroke Dock
We survey and install across Dyfed, and Pembroke Dock is one of the towns covered. Neighbouring towns we cover include Milford Haven (3 miles away), Haverfordwest and Carmarthen.
For reference, Pembroke Dock lies about 29 miles south-west of Carmarthen.
For warehouses, depots and workshops in and around Pembroke Dock, the door is sized to the opening, the wind on that elevation and the number of cycles a day.
Each industrial door is specified for its own opening, so a site in Pembroke Dock gets a door matched to its size, use and power supply rather than a single standard.
Which options suit you?
Ways to specify industrial roller shutter doors for Pembroke Dock:
- WindWind hooks or bars in the laths for exposed openings.
- CurtainSingle-skin galvanised steel, insulated, or with vision laths.
- ControlsHold-to-run, push-button, pull cord, radar, loop or remote.
Guide prices for industrial roller shutter doors in Pembroke Dock
| Industrial roller shutter doors | Ex VAT | Inc VAT |
|---|---|---|
| Loading door around 4,000 × 4,500 mm, steel, electric | £3,295 – £5,995 | £3,955 – £7,195 |
| Insulated door around 4,000 × 4,500 mm, electric | £4,495 – £7,995 | £5,395 – £9,595 |
| Large opening over 6,000 mm wide | £6,995 – £13,995 | £8,395 – £16,795 |
Guide prices, per door, supplied and fitted. VAT at 20% where it applies.
Prices are typical for the UK and apply in Pembroke Dock too; the survey confirms the size and specification before you get a fixed price.
What to check in Pembroke Dock before ordering
As a Welsh town, Pembroke Dock follows the Town and Country Planning Act 1990 and the Welsh permitted development rules.
- Power supply: Industrial motors may need a 3-phase supply or a dedicated circuit; we confirm what is on site at survey.
- Workplace safety: Powered doors in workplaces must be safe to use and kept maintained; that includes working safety edges or photocells and regular servicing.
- Lifting and access: Large doors are installed with suitable access equipment and a site-specific method statement.
From survey to fitting
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
One clear quotation
Everything included is listed, and nothing is ordered until you accept.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Frequently asked questions
How much does an industrial roller door cost?
A typical 4 × 4.5 m electric steel door is around £3,295–£5,995 plus VAT, supplied and fitted. Insulated doors, larger openings and high-duty motors cost more.
How often should an industrial door be serviced?
Most busy doors are serviced every six months, quieter doors annually, so the safety devices and motor are checked regularly.
How much do industrial roller shutter doors cost in Pembroke Dock?
We use the same UK guide prices in Pembroke Dock; after the survey you get a fixed written price for your opening.
Do you cover Pembroke Dock?
Yes. Pembroke Dock and the SA72 postcode district are part of our coverage across Dyfed.