Industrial roller shutter doors in Hyde
If your address has an SK14 postcode, it falls within our Greater Manchester coverage. Our coverage around Hyde also includes Denton, Dukinfield and Stalybridge.
For reference, Hyde lies about 7 miles east of Manchester.
Each industrial door is specified for its own opening, so a site in Hyde gets a door matched to its size, use and power supply rather than a single standard.
Installations at sites in Hyde are planned to keep a loading bay out of use for as short a time as possible.
What can you choose in Hyde?
What you can choose when we survey in Hyde:
- ControlsHold-to-run, push-button, pull cord, radar, loop or remote.
- DriveDirect-drive industrial gear motor with chain or hand-crank emergency operation.
- WindWind hooks or bars in the laths for exposed openings.
Prices for industrial roller shutter doors in Hyde
| Industrial roller shutter doors | Ex VAT | Inc VAT |
|---|---|---|
| Loading door around 4,000 × 4,500 mm, steel, electric | £3,295 – £5,995 | £3,955 – £7,195 |
| Insulated door around 4,000 × 4,500 mm, electric | £4,495 – £7,995 | £5,395 – £9,595 |
| Large opening over 6,000 mm wide | £6,995 – £13,995 | £8,395 – £16,795 |
Guide prices, per door, supplied and fitted. VAT at 20% where it applies.
These are UK guide prices for supply and fit. Your price in Hyde is fixed in writing after survey.
What to check in Hyde before ordering
As an English town, Hyde follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Power supply: Industrial motors may need a 3-phase supply or a dedicated circuit; we confirm what is on site at survey.
- Lifting and access: Large doors are installed with suitable access equipment and a site-specific method statement.
- Workplace safety: Powered doors in workplaces must be safe to use and kept maintained; that includes working safety edges or photocells and regular servicing.
What happens next
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
Price in writing
A fixed price for the work described, with the lead time stated.
Made, fitted, handed over
Your shutter is made to measure, fitted, set up and demonstrated.
Industrial roller shutter doors in Hyde: questions
How often should an industrial door be serviced?
Most busy doors are serviced every six months, quieter doors annually, so the safety devices and motor are checked regularly.
Should I choose insulated or single-skin?
Insulated if the building is heated or you get condensation; single-skin steel for unheated stores, farms and compounds.
Do you cover Hyde?
Yes. Hyde and the SK14 postcode district are part of our coverage across Greater Manchester.
Is the survey free in Hyde?
Yes, surveys for new installations in Hyde are free. Repair and service visits are charged.