Our industrial roller shutter doors service in Tonbridge
Tonbridge is roughly 12 miles south-west of Maidstone.
For warehouses, depots and workshops in and around Tonbridge, the door is sized to the opening, the wind on that elevation and the number of cycles a day.
Agricultural and rural buildings around Tonbridge often suit galvanised steel doors, manual or electric depending on the power available.
We survey and install across Kent, and Tonbridge is one of the towns covered. Neighbouring towns we cover include Tunbridge Wells (4 miles away), Sevenoaks and Crowborough.
Specifying industrial roller shutter doors for Tonbridge
Decisions we make with you at the survey in Tonbridge:
- DriveDirect-drive industrial gear motor with chain or hand-crank emergency operation.
- WindWind hooks or bars in the laths for exposed openings.
- ControlsHold-to-run, push-button, pull cord, radar, loop or remote.
Guide prices for industrial roller shutter doors in Tonbridge
| Industrial roller shutter doors | Ex VAT | Inc VAT |
|---|---|---|
| Loading door around 4,000 × 4,500 mm, steel, electric | £3,295 – £5,995 | £3,955 – £7,195 |
| Insulated door around 4,000 × 4,500 mm, electric | £4,495 – £7,995 | £5,395 – £9,595 |
| Large opening over 6,000 mm wide | £6,995 – £13,995 | £8,395 – £16,795 |
Guide prices, per door, supplied and fitted. VAT at 20% where it applies.
These are UK guide prices for supply and fit. Your price in Tonbridge is fixed in writing after survey.
Rules that apply in Tonbridge
As an English town, Tonbridge follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Power supply: Industrial motors may need a 3-phase supply or a dedicated circuit; we confirm what is on site at survey.
- Workplace safety: Powered doors in workplaces must be safe to use and kept maintained; that includes working safety edges or photocells and regular servicing.
- Lifting and access: Large doors are installed with suitable access equipment and a site-specific method statement.
From survey to fitting
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Survey at the property
A surveyor measures, checks what the box and guides will fix to, and talks through options.
One clear quotation
Everything included is listed, and nothing is ordered until you accept.
Installation and handover
We fit, test the controls and safety devices, and leave the documents with you.
Industrial roller shutter doors in Tonbridge: questions
How often should an industrial door be serviced?
Most busy doors are serviced every six months, quieter doors annually, so the safety devices and motor are checked regularly.
Should I choose insulated or single-skin?
Insulated if the building is heated or you get condensation; single-skin steel for unheated stores, farms and compounds.
Do you cover Tonbridge?
Yes. Tonbridge and the TN9 postcode district are part of our coverage across Kent.
How much do industrial roller shutter doors cost in Tonbridge?
Typical prices are shown above. A survey at your property in Tonbridge confirms the specification and fixes the price.