Industrial doors for properties in Newcastle-under-Lyme
Whether your property is in the centre of Newcastle-under-Lyme or on its edges, it is included in our Staffordshire coverage. Our coverage around Newcastle-under-Lyme also includes Stoke-on-Trent, Kidsgrove and Crewe.
For reference, Newcastle-under-Lyme lies about 2 miles west of Stoke-on-Trent.
For warehouses, depots and workshops in and around Newcastle-under-Lyme, the door is sized to the opening, the wind on that elevation and the number of cycles a day.
Installations at sites in Newcastle-under-Lyme are planned to keep a loading bay out of use for as short a time as possible.
Specifying industrial roller shutter doors for Newcastle-under-Lyme
Options we specify for properties in Newcastle-under-Lyme:
- CurtainSingle-skin galvanised steel, insulated, or with vision laths.
- ControlsHold-to-run, push-button, pull cord, radar, loop or remote.
- WindWind hooks or bars in the laths for exposed openings.
Guide prices for industrial roller shutter doors in Newcastle-under-Lyme
| Industrial roller shutter doors | Ex VAT | Inc VAT |
|---|---|---|
| Loading door around 4,000 × 4,500 mm, steel, electric | £3,295 – £5,995 | £3,955 – £7,195 |
| Insulated door around 4,000 × 4,500 mm, electric | £4,495 – £7,995 | £5,395 – £9,595 |
| Large opening over 6,000 mm wide | £6,995 – £13,995 | £8,395 – £16,795 |
Guide prices, per door, supplied and fitted. VAT at 20% where it applies.
Prices are typical for the UK and apply in Newcastle-under-Lyme too; the survey confirms the size and specification before you get a fixed price.
Rules that apply in Newcastle-under-Lyme
As an English town, Newcastle-under-Lyme follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Workplace safety: Powered doors in workplaces must be safe to use and kept maintained; that includes working safety edges or photocells and regular servicing.
- Lifting and access: Large doors are installed with suitable access equipment and a site-specific method statement.
- Power supply: Industrial motors may need a 3-phase supply or a dedicated circuit; we confirm what is on site at survey.
From survey to fitting
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
Fixed written price
You get a quotation listing the shutter, controls, fitting and lead time.
Made, fitted, handed over
Your shutter is made to measure, fitted, set up and demonstrated.
Frequently asked questions
Can you replace a door in a working warehouse?
Yes. We plan the work to keep the bay out of action for as short a time as possible, often a single day for a like-for-like door.
How often should an industrial door be serviced?
Most busy doors are serviced every six months, quieter doors annually, so the safety devices and motor are checked regularly.
How much do industrial roller shutter doors cost in Newcastle-under-Lyme?
Typical prices are shown above. A survey at your property in Newcastle-under-Lyme confirms the specification and fixes the price.
Do I need permission for industrial roller shutter doors in Newcastle-under-Lyme?
It depends on the property. New doors on industrial buildings can need planning permission if they change the elevation, and doors in fire compartment walls must suit the fire strategy. Check with your local council before ordering; we can supply drawings.