Industrial roller shutter doors across Tyne and Wear
We supply and fit industrial roller shutter doors throughout Tyne and Wear, from Newcastle upon Tyne to the smaller towns, with one written price per job.
We have local pages for 12 towns in Tyne and Wear, starting with Newcastle upon Tyne. Neighbouring areas we also cover include County Durham, Northumberland, North Yorkshire.
High-cycle openings in Tyne and Wear, such as busy loading bays and forklift routes, are specified with the motor, controls and safety devices to match the traffic.
Towns we cover in Tyne and Wear include:
- Industrial doors in Newcastle upon Tyne
- Industrial doors in Sunderland
- Industrial doors in South Shields
- Industrial doors in Gateshead
- Industrial doors in Washington
- Industrial doors in Tynemouth
- Industrial doors in Wallsend
- Industrial doors in North Shields
- Industrial doors in Whitley Bay
- Industrial doors in Houghton-le-Spring
- Industrial doors in Jarrow
- Industrial doors in Hebburn
Which options suit you?
Decisions we make with you at the survey in Tyne and Wear:
- WindWind hooks or bars in the laths for exposed openings.
- ControlsHold-to-run, push-button, pull cord, radar, loop or remote.
- DriveDirect-drive industrial gear motor with chain or hand-crank emergency operation.
- CurtainSingle-skin galvanised steel, insulated, or with vision laths.
How much do industrial roller shutter doors cost in Tyne and Wear?
| Industrial roller shutter doors | Ex VAT | Inc VAT |
|---|---|---|
| Loading door around 4,000 × 4,500 mm, steel, electric | £3,295 – £5,995 | £3,955 – £7,195 |
| Insulated door around 4,000 × 4,500 mm, electric | £4,495 – £7,995 | £5,395 – £9,595 |
| Large opening over 6,000 mm wide | £6,995 – £13,995 | £8,395 – £16,795 |
Guide prices, per door, supplied and fitted. VAT at 20% where it applies.
These are UK guide prices for supply and fit. Your price in Tyne and Wear is fixed in writing after survey.
Rules that apply in Tyne and Wear
Planning questions anywhere in Tyne and Wear go to your local planning authority (the district, borough, city or unitary council).
- Workplace safety: Powered doors in workplaces must be safe to use and kept maintained; that includes working safety edges or photocells and regular servicing.
- Lifting and access: Large doors are installed with suitable access equipment and a site-specific method statement.
- Power supply: Industrial motors may need a 3-phase supply or a dedicated circuit; we confirm what is on site at survey.
How it works
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Free survey
We measure the opening and the space around it, and check fixings and power.
Price in writing
A fixed price for the work described, with the lead time stated.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Industrial roller shutter doors in Tyne and Wear: questions
How often should an industrial door be serviced?
Most busy doors are serviced every six months, quieter doors annually, so the safety devices and motor are checked regularly.
Should I choose insulated or single-skin?
Insulated if the building is heated or you get condensation; single-skin steel for unheated stores, farms and compounds.
Do I need permission for industrial roller shutter doors in Tyne and Wear?
Possibly. New doors on industrial buildings can need planning permission if they change the elevation, and doors in fire compartment walls must suit the fire strategy. We recommend checking with your local council first.
Is the survey free in Tyne and Wear?
Yes, for new installations. We tell you the cost of any repair or service visit before booking.