Industrial roller shutter doors across West Sussex
Industrial roller shutter doors for industrial and commercial sites in West Sussex, measured on site and fitted to the survey.
We have local pages for 9 towns in West Sussex, starting with Crawley. Neighbouring areas we also cover include East Sussex, Surrey, Hampshire.
Agricultural and rural buildings around West Sussex often suit galvanised steel doors, manual or electric depending on the power available.
Towns we cover in West Sussex include:
- Industrial doors in Crawley
- Industrial doors in Worthing
- Industrial doors in Bognor Regis
- Industrial doors in Littlehampton
- Industrial doors in Horsham
- Industrial doors in Haywards Heath
- Industrial doors in Chichester
- Industrial doors in Burgess Hill
- Industrial doors in East Grinstead
Which options suit you?
The main choices for industrial roller shutter doors in West Sussex:
- WindWind hooks or bars in the laths for exposed openings.
- ControlsHold-to-run, push-button, pull cord, radar, loop or remote.
- CurtainSingle-skin galvanised steel, insulated, or with vision laths.
- DriveDirect-drive industrial gear motor with chain or hand-crank emergency operation.
How much do industrial roller shutter doors cost in West Sussex?
| Industrial roller shutter doors | Ex VAT | Inc VAT |
|---|---|---|
| Loading door around 4,000 × 4,500 mm, steel, electric | £3,295 – £5,995 | £3,955 – £7,195 |
| Insulated door around 4,000 × 4,500 mm, electric | £4,495 – £7,995 | £5,395 – £9,595 |
| Large opening over 6,000 mm wide | £6,995 – £13,995 | £8,395 – £16,795 |
Guide prices, per door, supplied and fitted. VAT at 20% where it applies.
Guide prices only: access, fixings, power and finish at your property in West Sussex can move the figure up or down, and the survey settles it.
Rules that apply in West Sussex
Across West Sussex, planning follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Workplace safety: Powered doors in workplaces must be safe to use and kept maintained; that includes working safety edges or photocells and regular servicing.
- Lifting and access: Large doors are installed with suitable access equipment and a site-specific method statement.
- Power supply: Industrial motors may need a 3-phase supply or a dedicated circuit; we confirm what is on site at survey.
How it works
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Free survey
We measure the opening and the space around it, and check fixings and power.
Price in writing
A fixed price for the work described, with the lead time stated.
Installation and handover
We fit, test the controls and safety devices, and leave the documents with you.
Industrial roller shutter doors in West Sussex: questions
How often should an industrial door be serviced?
Most busy doors are serviced every six months, quieter doors annually, so the safety devices and motor are checked regularly.
Should I choose insulated or single-skin?
Insulated if the building is heated or you get condensation; single-skin steel for unheated stores, farms and compounds.
How much do industrial roller shutter doors cost in West Sussex?
We use the same UK guide prices in West Sussex; after the survey you get a fixed written price for your opening.
Do I need permission for industrial roller shutter doors in West Sussex?
Possibly. New doors on industrial buildings can need planning permission if they change the elevation, and doors in fire compartment walls must suit the fire strategy. We recommend checking with your local council first.