Our manual roller shutters service in Cirencester
If your address has a GL7 postcode, it falls within our Gloucestershire coverage. Other towns nearby that we cover include Stroud, Cheltenham and Swindon.
Cirencester is roughly 15 miles south-east of Gloucester.
Manual push-up and crank shutters still suit small frontages in Cirencester where there is no power at the box or the shutter only runs once a day.
We check the fascia, the box space and the power supply on every shopfront in Cirencester before quoting, so the fixed price reflects the real job.
Options for manual roller shutters in Cirencester
Ways to specify manual roller shutters for Cirencester:
- ChainEndless chain and gearbox for large doors.
- CrankGearbox and removable crank handle for mid-sized openings.
- Push-upSpring-balanced, for smaller openings up to around 2,500 mm wide.
Guide prices for Cirencester
| Manual roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Push-up shutter up to 2,500 mm wide | £695 – £1,295 | £835 – £1,555 |
| Crank-operated up to 4,000 × 3,000 mm | £1,195 – £2,495 | £1,435 – £2,995 |
| Chain-operated, larger openings | £1,995 – £3,995 | £2,395 – £4,795 |
Guide prices, per shutter, supplied and fitted. VAT at 20% where it applies.
Prices are typical for the UK and apply in Cirencester too; the survey confirms the size and specification before you get a fixed price.
Rules that apply in Cirencester
Cirencester is in England, so planning decisions sit with your local planning authority (the district, borough, city or unitary council).
- Planning: The planning advice for shutters applies whether manual or electric.
- Effort: Large manual shutters take time and effort to open; if staff open it every day, electric is usually better value over time.
From survey to fitting
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Free survey
We measure the opening and the space around it, and check fixings and power.
Fixed written price
You get a quotation listing the shutter, controls, fitting and lead time.
Made, fitted, handed over
Your shutter is made to measure, fitted, set up and demonstrated.
Manual roller shutters in Cirencester: questions
Can a manual shutter be motorised later?
In most cases yes, by fitting a motor inside the barrel or a gear motor on the side.
Why is my push-up shutter heavy?
The springs that balance the curtain lose tension over time. Re-tensioning or replacing them usually fixes it.
Is the survey free in Cirencester?
Yes, surveys for new installations in Cirencester are free. Repair and service visits are charged.
How much do manual roller shutters cost in Cirencester?
The guide prices above apply in Cirencester. Your exact price depends on size, finish, controls and access, and is fixed in writing after survey.