Manual to electric conversion in Crewe
We survey and install across Cheshire, and Crewe is one of the towns covered. Other towns nearby that we cover include Winsford, Kidsgrove and Congleton.
Crewe is roughly 20 miles east of Chester.
Work in Crewe starts with a free survey: we measure the opening, check what the box and guides will fix to, and confirm the power supply.
This work covers homes, shops and industrial premises in Crewe, so one survey can cover several openings of different types.
Options for manual to electric conversion in Crewe
What you can choose when we survey in Crewe:
- ShopTube motor with key switch or remote and manual override.
- DomesticTubular motor and switch or remote for window shutters.
- IndustrialGear motor with controls and emergency operation.
Guide prices for manual to electric conversion in Crewe
| Manual to electric conversion | Inc VAT | Ex VAT |
|---|---|---|
| Domestic window shutter conversion | £355 – £655 | £295 – £545 |
| Shop shutter conversion with key switch | £955 – £1,795 | £795 – £1,495 |
| Industrial door conversion with gear motor | £1,555 – £2,995 | £1,295 – £2,495 |
Guide prices, per shutter, supplied and fitted. VAT at 20% where it applies.
Guide prices only: access, fixings, power and finish at your property in Crewe can move the figure up or down, and the survey settles it.
Planning and safety in Crewe
As an English town, Crewe follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Safety devices: Converting a commercial door to powered operation means adding suitable safety devices and commissioning them.
- Power: A suitable supply is needed near the shutter box; electrical work is done to BS 7671.
From survey to fitting
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
Price in writing
A fixed price for the work described, with the lead time stated.
Made, fitted, handed over
Your shutter is made to measure, fitted, set up and demonstrated.
Manual to electric conversion in Crewe: questions
Can any manual shutter be made electric?
Most can, as long as the curtain, barrel and guides are in reasonable condition. Very old or damaged shutters may be better replaced.
How long does a conversion take?
Most domestic and shop conversions take a few hours once the parts are ready, plus any electrical work.
Do you cover Crewe?
Yes. Book a survey for any address in Crewe in the usual way; it is covered as part of Cheshire.
Is the survey free in Crewe?
Yes, for new installations. We tell you the cost of any repair or service visit before booking.