Call free 0800 088 6248
Rollershutters-UKHomes · Shops · Industry
West Glamorgan · SA13

Manual to electric conversion in Port Talbot

Need manual to electric conversion in Port Talbot? We survey the opening, check fixings and power, and give you one written price for the work.

A manual-to-electric conversion adds a motor and controls to a shutter that is currently pushed up, cranked or chain-operated. In Port Talbot we survey, quote in writing and fit, as part of our coverage across West Glamorgan.

From £355 inc VAT

Free survey & quoteNo obligation
Please choose an option.
Enter a valid UK postcode.
Enter a phone number we can call.
Please enter your name.
Check the email address.

We use your details only to reply to this enquiry. See our privacy notice.

Electric conversion for properties in Port Talbot

Port Talbot is part of our West Glamorgan coverage, and addresses in the SA13 postcode district are covered in the same way as the rest of West Glamorgan. Other towns nearby that we cover include Maesteg, Neath and Bridgend.

Port Talbot sits some 12 miles to the east of Swansea.

Work in Port Talbot starts with a free survey: we measure the opening, check what the box and guides will fix to, and confirm the power supply.

Converting a manual shutter in Port Talbot to electric depends on the curtain, barrel and guides being in good condition, so we check them before quoting.

Which options suit you?

The main choices for manual to electric conversion in Port Talbot:

  • ShopTube motor with key switch or remote and manual override.
  • IndustrialGear motor with controls and emergency operation.
  • DomesticTubular motor and switch or remote for window shutters.

Guide prices for Port Talbot

Manual to electric conversionInc VATEx VAT
Domestic window shutter conversion£355 – £655£295 – £545
Shop shutter conversion with key switch£955 – £1,795£795 – £1,495
Industrial door conversion with gear motor£1,555 – £2,995£1,295 – £2,495

Guide prices, per shutter, supplied and fitted. VAT at 20% where it applies.

Prices are typical for the UK and apply in Port Talbot too; the survey confirms the size and specification before you get a fixed price.

What to check in Port Talbot before ordering

In Port Talbot, as elsewhere in Wales, planning questions go to your local planning authority (the county or county borough council, or a national park authority).

  • Power: A suitable supply is needed near the shutter box; electrical work is done to BS 7671.
  • Safety devices: Converting a commercial door to powered operation means adding suitable safety devices and commissioning them.

How it works in Port Talbot

  1. Send the basics

    Tell us what the shutter is for and the rough size, with photos if you have them.

  2. Free survey

    We measure the opening and the space around it, and check fixings and power.

  3. Price in writing

    A fixed price for the work described, with the lead time stated.

  4. Installation and handover

    We fit, test the controls and safety devices, and leave the documents with you.

Frequently asked questions

Is it worth converting rather than replacing?

If the shutter is sound, yes: a conversion costs a fraction of a new shutter.

Can any manual shutter be made electric?

Most can, as long as the curtain, barrel and guides are in reasonable condition. Very old or damaged shutters may be better replaced.

Do I need permission for manual to electric conversion in Port Talbot?

It depends on the property. Like-for-like replacements do not usually need permission, but a new external shutter or a change of type or position can, especially on shopfronts and listed buildings. Check with your local council before ordering; we can supply drawings.

How much does manual to electric conversion cost in Port Talbot?

We use the same UK guide prices in Port Talbot; after the survey you get a fixed written price for your opening.

Get a fixed price for your shutters

Free survey for new installations, a written fixed price, and fitting across the UK.

Call freeGet a quote