Our roller shutter motor replacement service in Portadown
We cover Portadown and the BT62 postcode district as part of County Armagh; you book a visit here exactly as you would anywhere else. We also carry out roller shutter motor replacement in Craigavon, Lurgan and Armagh.
Portadown is roughly 3 miles south-west of Craigavon.
A motor that hums but does not turn, a shutter that stops part-way or a remote that has stopped working can all be diagnosed on site in Portadown.
Repair and service visits in Portadown are charged; we tell you the visit cost before booking and agree anything beyond it with you.
What roller shutter motor replacement can cover in Portadown
What we look at on a visit in Portadown:
- DomesticTubular motors for window, door and garage shutters.
- ShopTube motors or external drives with key switch.
- IndustrialDirect-drive gear motors with emergency hand operation.
Guide prices for roller shutter motor replacement in Portadown
| Roller shutter motor replacement | Inc VAT | Ex VAT |
|---|---|---|
| Domestic tubular motor | £295 – £595 | £245 – £495 |
| Shop or commercial tube motor | £715 – £1,435 | £595 – £1,195 |
| Industrial side-mounted gear motor | £1,075 – £2,275 | £895 – £1,895 |
Guide prices, per motor, supplied and fitted. VAT at 20% where it applies.
These are UK guide prices. We tell you the visit cost for Portadown when you book, and agree anything beyond it before doing the work.
What to check in Portadown before ordering
Portadown is in Northern Ireland, so planning decisions sit with your local council, which has been the planning authority since 2015.
- Electrical work: Motors are wired to BS 7671; any change to the supply is done by a qualified electrician.
From enquiry to finished job
Describe the problem
What the shutter is doing, what it is made of and roughly when it was fitted, with photos if possible.
Engineer visit
We inspect the shutter, controls and safety devices and confirm what is needed.
Your go-ahead
You approve any parts or extra work before we carry it out.
Work done, report left
The shutter is tested after the work and you get a record of what was found and done.
Frequently asked questions
How much does a new shutter motor cost?
A domestic tubular motor is usually £295–£595 including VAT fitted (£245–£495 plus VAT); commercial and industrial motors cost more depending on size and duty.
How do I know if my shutter motor has failed?
If the shutter hums but does not move, stops part way, or does nothing when the power and switch are fine, the motor or its limits are the likely cause. We test before replacing.
Do you work on shutters fitted by other companies?
Yes, most makes and ages of shutter; photos and any labels help us bring the right parts to Portadown.
Do you charge for a visit in Portadown?
Yes, visits for repairs and servicing are charged, and we tell you the cost before booking. New-installation surveys are free.