Our roller shutter motor replacement service in Omagh
We carry out roller shutter motor replacement across County Tyrone, and Omagh is one of the towns covered. We also carry out roller shutter motor replacement in Strabane, Irvinestown and Cookstown.
A motor that hums but does not turn, a shutter that stops part-way or a remote that has stopped working can all be diagnosed on site in Omagh.
For premises in Omagh with more than one shutter, a planned service visit usually costs less than waiting for breakdowns.
What roller shutter motor replacement can cover in Omagh
What we look at on a visit in Omagh:
- IndustrialDirect-drive gear motors with emergency hand operation.
- ShopTube motors or external drives with key switch.
- DomesticTubular motors for window, door and garage shutters.
Guide prices for Omagh
| Roller shutter motor replacement | Inc VAT | Ex VAT |
|---|---|---|
| Domestic tubular motor | £295 – £595 | £245 – £495 |
| Shop or commercial tube motor | £715 – £1,435 | £595 – £1,195 |
| Industrial side-mounted gear motor | £1,075 – £2,275 | £895 – £1,895 |
Guide prices, per motor, supplied and fitted. VAT at 20% where it applies.
Use these to budget in Omagh; parts and any extra work are confirmed with you on the day before we go ahead.
Rules that apply in Omagh
In Omagh, planning follows the Planning Act (Northern Ireland) 2011 and the NI permitted development rules.
- Electrical work: Motors are wired to BS 7671; any change to the supply is done by a qualified electrician.
How it works in Omagh
Describe the problem
What the shutter is doing, what it is made of and roughly when it was fitted, with photos if possible.
Visit and diagnosis
An engineer checks the shutter, finds the cause and explains the options.
Cost agreed first
Anything beyond the visit is priced and agreed with you before the work is done.
Fixed and reported
We complete the work, test the shutter and leave a short written report.
Roller shutter motor replacement in Omagh: questions
How do I know if my shutter motor has failed?
If the shutter hums but does not move, stops part way, or does nothing when the power and switch are fine, the motor or its limits are the likely cause. We test before replacing.
How much does a new shutter motor cost?
A domestic tubular motor is usually £295–£595 including VAT fitted (£245–£495 plus VAT); commercial and industrial motors cost more depending on size and duty.
Do you cover Omagh?
Yes, we carry out roller shutter motor replacement in Omagh (BT78) as part of our County Tyrone coverage.
Do you charge for a visit in Omagh?
Yes, visits for repairs and servicing are charged, and we tell you the cost before booking. New-installation surveys are free.