Motor replacement for properties in Bearsden
Bearsden is part of our Dunbartonshire & Argyll coverage, and addresses in the G61 postcode district are covered in the same way as the rest of Dunbartonshire & Argyll. Neighbouring towns we cover include Clydebank (3 miles away), Renfrew and Bishopbriggs.
Bearsden is roughly 10 miles east of Dumbarton.
In Bearsden, as everywhere, a jammed or dropped shutter should not be forced; keep people clear and call us so it can be made safe.
If a shutter in Bearsden is no longer worth repairing, we will say so and price a replacement curtain or motor instead of a repeat visit.
Faults and work we handle in Bearsden
What we look at on a visit in Bearsden:
- ShopTube motors or external drives with key switch.
- DomesticTubular motors for window, door and garage shutters.
- IndustrialDirect-drive gear motors with emergency hand operation.
Prices for roller shutter motor replacement in Bearsden
| Roller shutter motor replacement | Inc VAT | Ex VAT |
|---|---|---|
| Domestic tubular motor | £295 – £595 | £245 – £495 |
| Shop or commercial tube motor | £715 – £1,435 | £595 – £1,195 |
| Industrial side-mounted gear motor | £1,075 – £2,275 | £895 – £1,895 |
Guide prices, per motor, supplied and fitted. VAT at 20% where it applies.
Use these to budget in Bearsden; parts and any extra work are confirmed with you on the day before we go ahead.
What to check in Bearsden before ordering
Bearsden is in Scotland, so planning decisions sit with your planning authority (the local council, or a national park authority).
- Electrical work: Motors are wired to BS 7671; any change to the supply is done by a qualified electrician.
From enquiry to finished job
Describe the problem
What the shutter is doing, what it is made of and roughly when it was fitted, with photos if possible.
Engineer visit
We inspect the shutter, controls and safety devices and confirm what is needed.
Your go-ahead
You approve any parts or extra work before we carry it out.
Work done, report left
The shutter is tested after the work and you get a record of what was found and done.
Questions about roller shutter motor replacement in Bearsden
Can I replace the motor without replacing the shutter?
Yes, in most cases. The motor slides out of the barrel or unbolts from the side.
How much does a new shutter motor cost?
A domestic tubular motor is usually £295–£595 including VAT fitted (£245–£495 plus VAT); commercial and industrial motors cost more depending on size and duty.
Do you cover Bearsden?
Yes, we carry out roller shutter motor replacement in Bearsden (G61) as part of our Dunbartonshire & Argyll coverage.
Do you work on shutters fitted by other companies?
Yes, most makes and ages of shutter; photos and any labels help us bring the right parts to Bearsden.