Call free 0800 088 6248
Rollershutters-UKHomes · Shops · Industry
Dundee & Angus · DD8

Roller shutter motor replacement in Forfar

Roller shutter motor replacement carried out in Forfar on domestic, shop and industrial shutters, with anything beyond the visit agreed first.

Roller shutter motor replacement means removing a failed or worn motor and fitting a new one matched to the curtain's weight and barrel, then setting the open and closed limits and testing the safety devices. We carry out this work in Forfar and the DD8 postcode district as part of our coverage across Dundee & Angus.

From £295 inc VAT

Book a motor replacement visitVisit cost agreed first
Please choose an option.
Enter a valid UK postcode.
Enter a phone number we can call.
Please enter your name.
Check the email address.

We use your details only to reply to this enquiry. See our privacy notice.

Roller shutter motor replacement in Forfar

Forfar is part of our Dundee & Angus coverage, and addresses in the DD8 postcode district are covered in the same way as the rest of Dundee & Angus. Visits can also be arranged in Dundee, Carnoustie and Arbroath, so several sites can be booked together.

Forfar is roughly 10 miles north of Dundee.

In Forfar, as everywhere, a jammed or dropped shutter should not be forced; keep people clear and call us so it can be made safe.

When a shutter in Forfar fails, photos of the shutter, the box and any labels help us bring the likely parts on the first visit.

Faults and work we handle in Forfar

What we look at on a visit in Forfar:

  • ShopTube motors or external drives with key switch.
  • IndustrialDirect-drive gear motors with emergency hand operation.
  • DomesticTubular motors for window, door and garage shutters.

Guide prices for roller shutter motor replacement in Forfar

Roller shutter motor replacementInc VATEx VAT
Domestic tubular motor£295 – £595£245 – £495
Shop or commercial tube motor£715 – £1,435£595 – £1,195
Industrial side-mounted gear motor£1,075 – £2,275£895 – £1,895

Guide prices, per motor, supplied and fitted. VAT at 20% where it applies.

Guide prices only: the make, size and condition of your shutter decide the final figure, and nothing beyond the visit is done without your say-so.

Planning and safety in Forfar

As a Scottish town, Forfar follows the Town and Country Planning (Scotland) Act 1997 and the Scottish permitted development rules.

  • Electrical work: Motors are wired to BS 7671; any change to the supply is done by a qualified electrician.

From enquiry to finished job

  1. Describe the problem

    What the shutter is doing, what it is made of and roughly when it was fitted, with photos if possible.

  2. Visit and diagnosis

    An engineer checks the shutter, finds the cause and explains the options.

  3. Cost agreed first

    Anything beyond the visit is priced and agreed with you before the work is done.

  4. Work done, report left

    The shutter is tested after the work and you get a record of what was found and done.

Roller shutter motor replacement in Forfar: questions

Can I replace the motor without replacing the shutter?

Yes, in most cases. The motor slides out of the barrel or unbolts from the side.

How much does a new shutter motor cost?

A domestic tubular motor is usually £295–£595 including VAT fitted (£245–£495 plus VAT); commercial and industrial motors cost more depending on size and duty.

How much does roller shutter motor replacement cost in Forfar?

We use the same UK guide prices in Forfar; anything beyond the visit is confirmed with you first.

Do you charge for a visit in Forfar?

Yes. Repair and service visits are charged at the rate we give you when you book. Surveys for new installations are free.

Get a fixed price for your shutters

Free survey for new installations, a written fixed price, and fitting across the UK.

Call freeGet a quote