Motor replacement for properties in Kirkcaldy
We cover Kirkcaldy and the KY1 postcode district as part of Fife; you book a visit here exactly as you would anywhere else. Other towns nearby that we cover include Glenrothes, Edinburgh and Dunfermline.
Kirkcaldy is roughly 12 miles east of Dunfermline.
For premises in Kirkcaldy with more than one shutter, a planned service visit usually costs less than waiting for breakdowns.
A motor that hums but does not turn, a shutter that stops part-way or a remote that has stopped working can all be diagnosed on site in Kirkcaldy.
What roller shutter motor replacement can cover in Kirkcaldy
How roller shutter motor replacement is handled in Kirkcaldy:
- ShopTube motors or external drives with key switch.
- IndustrialDirect-drive gear motors with emergency hand operation.
- DomesticTubular motors for window, door and garage shutters.
Guide prices for roller shutter motor replacement in Kirkcaldy
| Roller shutter motor replacement | Inc VAT | Ex VAT |
|---|---|---|
| Domestic tubular motor | £295 – £595 | £245 – £495 |
| Shop or commercial tube motor | £715 – £1,435 | £595 – £1,195 |
| Industrial side-mounted gear motor | £1,075 – £2,275 | £895 – £1,895 |
Guide prices, per motor, supplied and fitted. VAT at 20% where it applies.
Use these to budget in Kirkcaldy; parts and any extra work are confirmed with you on the day before we go ahead.
What to check in Kirkcaldy before ordering
Kirkcaldy is in Scotland, so planning decisions sit with your planning authority (the local council, or a national park authority).
- Electrical work: Motors are wired to BS 7671; any change to the supply is done by a qualified electrician.
How it works in Kirkcaldy
Describe the problem
What the shutter is doing, what it is made of and roughly when it was fitted, with photos if possible.
Engineer visit
We inspect the shutter, controls and safety devices and confirm what is needed.
Your go-ahead
You approve any parts or extra work before we carry it out.
Fixed and reported
We complete the work, test the shutter and leave a short written report.
Roller shutter motor replacement in Kirkcaldy: questions
How do I know if my shutter motor has failed?
If the shutter hums but does not move, stops part way, or does nothing when the power and switch are fine, the motor or its limits are the likely cause. We test before replacing.
How much does a new shutter motor cost?
A domestic tubular motor is usually £295–£595 including VAT fitted (£245–£495 plus VAT); commercial and industrial motors cost more depending on size and duty.
Do you cover Kirkcaldy?
Yes, we carry out roller shutter motor replacement in Kirkcaldy (KY1) as part of our Fife coverage.
Do you charge for a visit in Kirkcaldy?
Yes, visits for repairs and servicing are charged, and we tell you the cost before booking. New-installation surveys are free.
