Call free 0800 088 6248
Rollershutters-UKHomes · Shops · Industry
Greater London · E14

Roller shutter motor replacement in Canary Wharf

Need roller shutter motor replacement in Canary Wharf? Send photos of the shutter and box, and we will arrange a visit with the right parts.

Roller shutter motor replacement means removing a failed or worn motor and fitting a new one matched to the curtain's weight and barrel, then setting the open and closed limits and testing the safety devices. We carry out this work in Canary Wharf and the E14 postcode district as part of our coverage across Greater London.

From £295 inc VAT

Book a motor replacement visitVisit cost agreed first
Please choose an option.
Enter a valid UK postcode.
Enter a phone number we can call.
Please enter your name.
Check the email address.

We use your details only to reply to this enquiry. See our privacy notice.

Our roller shutter motor replacement service in Canary Wharf

We cover Canary Wharf and the E14 postcode district as part of Greater London; you book a visit here exactly as you would anywhere else. We also carry out roller shutter motor replacement in Bow, Canning Town and Greenwich.

Canary Wharf sits some 5 miles to the east of central London.

When a shutter in Canary Wharf fails, photos of the shutter, the box and any labels help us bring the likely parts on the first visit.

If a shutter in Canary Wharf is no longer worth repairing, we will say so and price a replacement curtain or motor instead of a repeat visit.

What roller shutter motor replacement can cover in Canary Wharf

What we look at on a visit in Canary Wharf:

  • DomesticTubular motors for window, door and garage shutters.
  • ShopTube motors or external drives with key switch.
  • IndustrialDirect-drive gear motors with emergency hand operation.

Guide prices for roller shutter motor replacement in Canary Wharf

Roller shutter motor replacementInc VATEx VAT
Domestic tubular motor£295 – £595£245 – £495
Shop or commercial tube motor£715 – £1,435£595 – £1,195
Industrial side-mounted gear motor£1,075 – £2,275£895 – £1,895

Guide prices, per motor, supplied and fitted. VAT at 20% where it applies.

Guide prices only: the make, size and condition of your shutter decide the final figure, and nothing beyond the visit is done without your say-so.

Rules that apply in Canary Wharf

In Canary Wharf, as elsewhere in England, planning questions go to your local planning authority (the district, borough, city or unitary council).

  • Electrical work: Motors are wired to BS 7671; any change to the supply is done by a qualified electrician.

From enquiry to finished job

  1. Send photos and details

    Tell us what the shutter is doing, roughly how big it is, and send photos of the shutter, box and any labels.

  2. Engineer visit

    We inspect the shutter, controls and safety devices and confirm what is needed.

  3. Cost agreed first

    Anything beyond the visit is priced and agreed with you before the work is done.

  4. Fixed and reported

    We complete the work, test the shutter and leave a short written report.

Questions about roller shutter motor replacement in Canary Wharf

How do I know if my shutter motor has failed?

If the shutter hums but does not move, stops part way, or does nothing when the power and switch are fine, the motor or its limits are the likely cause. We test before replacing.

Can I replace the motor without replacing the shutter?

Yes, in most cases. The motor slides out of the barrel or unbolts from the side.

Do you cover Canary Wharf?

Yes. Canary Wharf and the E14 postcode district are part of our coverage across Greater London.

How much does roller shutter motor replacement cost in Canary Wharf?

The guide prices above apply in Canary Wharf. We tell you the visit cost when you book and agree any parts or extra work before doing it.

Get a fixed price for your shutters

Free survey for new installations, a written fixed price, and fitting across the UK.

Call freeGet a quote