Our roller shutter motor replacement service in Dagenham
We carry out roller shutter motor replacement across Greater London, and Dagenham is one of the towns covered. Other towns nearby that we cover include Romford, Hornchurch and Barking.
Dagenham sits some 13 miles to the east of central London.
If a shutter in Dagenham is no longer worth repairing, we will say so and price a replacement curtain or motor instead of a repeat visit.
A motor that hums but does not turn, a shutter that stops part-way or a remote that has stopped working can all be diagnosed on site in Dagenham.
What the work can involve
How roller shutter motor replacement is handled in Dagenham:
- DomesticTubular motors for window, door and garage shutters.
- IndustrialDirect-drive gear motors with emergency hand operation.
- ShopTube motors or external drives with key switch.
Prices for roller shutter motor replacement in Dagenham
| Roller shutter motor replacement | Inc VAT | Ex VAT |
|---|---|---|
| Domestic tubular motor | £295 – £595 | £245 – £495 |
| Shop or commercial tube motor | £715 – £1,435 | £595 – £1,195 |
| Industrial side-mounted gear motor | £1,075 – £2,275 | £895 – £1,895 |
Guide prices, per motor, supplied and fitted. VAT at 20% where it applies.
Use these to budget in Dagenham; parts and any extra work are confirmed with you on the day before we go ahead.
Rules that apply in Dagenham
In Dagenham, as elsewhere in England, planning questions go to your local planning authority (the district, borough, city or unitary council).
- Electrical work: Motors are wired to BS 7671; any change to the supply is done by a qualified electrician.
From enquiry to finished job
Describe the problem
What the shutter is doing, what it is made of and roughly when it was fitted, with photos if possible.
Engineer visit
We inspect the shutter, controls and safety devices and confirm what is needed.
Cost agreed first
Anything beyond the visit is priced and agreed with you before the work is done.
Fixed and reported
We complete the work, test the shutter and leave a short written report.
Roller shutter motor replacement in Dagenham: questions
How do I know if my shutter motor has failed?
If the shutter hums but does not move, stops part way, or does nothing when the power and switch are fine, the motor or its limits are the likely cause. We test before replacing.
Can I replace the motor without replacing the shutter?
Yes, in most cases. The motor slides out of the barrel or unbolts from the side.
Do you charge for a visit in Dagenham?
Yes, visits for repairs and servicing are charged, and we tell you the cost before booking. New-installation surveys are free.
How much does roller shutter motor replacement cost in Dagenham?
The guide prices above apply in Dagenham. We tell you the visit cost when you book and agree any parts or extra work before doing it.