Our roller shutter motor replacement service in Failsworth
For reference, Failsworth lies about 3 miles north-east of Manchester.
Repair and service visits in Failsworth are charged; we tell you the visit cost before booking and agree anything beyond it with you.
A motor that hums but does not turn, a shutter that stops part-way or a remote that has stopped working can all be diagnosed on site in Failsworth.
If your address has an M35 postcode, it falls within our Greater Manchester coverage. We also carry out roller shutter motor replacement in Droylsden, Ashton-under-Lyne and Chadderton.
Faults and work we handle in Failsworth
What roller shutter motor replacement in Failsworth can cover:
- DomesticTubular motors for window, door and garage shutters.
- ShopTube motors or external drives with key switch.
- IndustrialDirect-drive gear motors with emergency hand operation.
Guide prices for Failsworth
| Roller shutter motor replacement | Inc VAT | Ex VAT |
|---|---|---|
| Domestic tubular motor | £295 – £595 | £245 – £495 |
| Shop or commercial tube motor | £715 – £1,435 | £595 – £1,195 |
| Industrial side-mounted gear motor | £1,075 – £2,275 | £895 – £1,895 |
Guide prices, per motor, supplied and fitted. VAT at 20% where it applies.
Use these to budget in Failsworth; parts and any extra work are confirmed with you on the day before we go ahead.
What to check in Failsworth before ordering
Failsworth is in England, so planning decisions sit with your local planning authority (the district, borough, city or unitary council).
- Electrical work: Motors are wired to BS 7671; any change to the supply is done by a qualified electrician.
What happens next
Describe the problem
What the shutter is doing, what it is made of and roughly when it was fitted, with photos if possible.
Engineer visit
We inspect the shutter, controls and safety devices and confirm what is needed.
Your go-ahead
You approve any parts or extra work before we carry it out.
Work done, report left
The shutter is tested after the work and you get a record of what was found and done.
Questions about roller shutter motor replacement in Failsworth
Can I replace the motor without replacing the shutter?
Yes, in most cases. The motor slides out of the barrel or unbolts from the side.
How do I know if my shutter motor has failed?
If the shutter hums but does not move, stops part way, or does nothing when the power and switch are fine, the motor or its limits are the likely cause. We test before replacing.
Do you charge for a visit in Failsworth?
Yes. Repair and service visits are charged at the rate we give you when you book. Surveys for new installations are free.
Do you work on shutters fitted by other companies?
Yes, most makes and ages of shutter; photos and any labels help us bring the right parts to Failsworth.