Roller shutter motor replacement in Cwmbran
Cwmbran is roughly 5 miles north of Newport.
In Cwmbran, as everywhere, a jammed or dropped shutter should not be forced; keep people clear and call us so it can be made safe.
We work on most makes of domestic, shop and industrial shutter in Cwmbran, including ones fitted by other companies.
Visits to Cwmbran and the surrounding area are arranged directly with you, as part of our coverage across Gwent. We also carry out roller shutter motor replacement in Pontypool, Risca and Newport.
What roller shutter motor replacement can cover in Cwmbran
How roller shutter motor replacement is handled in Cwmbran:
- ShopTube motors or external drives with key switch.
- IndustrialDirect-drive gear motors with emergency hand operation.
- DomesticTubular motors for window, door and garage shutters.
Guide prices for roller shutter motor replacement in Cwmbran
| Roller shutter motor replacement | Inc VAT | Ex VAT |
|---|---|---|
| Domestic tubular motor | £295 – £595 | £245 – £495 |
| Shop or commercial tube motor | £715 – £1,435 | £595 – £1,195 |
| Industrial side-mounted gear motor | £1,075 – £2,275 | £895 – £1,895 |
Guide prices, per motor, supplied and fitted. VAT at 20% where it applies.
Use these to budget in Cwmbran; parts and any extra work are confirmed with you on the day before we go ahead.
Rules that apply in Cwmbran
As a Welsh town, Cwmbran follows the Town and Country Planning Act 1990 and the Welsh permitted development rules.
- Electrical work: Motors are wired to BS 7671; any change to the supply is done by a qualified electrician.
How it works in Cwmbran
Describe the problem
What the shutter is doing, what it is made of and roughly when it was fitted, with photos if possible.
Engineer visit
We inspect the shutter, controls and safety devices and confirm what is needed.
Cost agreed first
Anything beyond the visit is priced and agreed with you before the work is done.
Work done, report left
The shutter is tested after the work and you get a record of what was found and done.
Frequently asked questions
How do I know if my shutter motor has failed?
If the shutter hums but does not move, stops part way, or does nothing when the power and switch are fine, the motor or its limits are the likely cause. We test before replacing.
Can I replace the motor without replacing the shutter?
Yes, in most cases. The motor slides out of the barrel or unbolts from the side.
How much does roller shutter motor replacement cost in Cwmbran?
We use the same UK guide prices in Cwmbran; anything beyond the visit is confirmed with you first.
Do you charge for a visit in Cwmbran?
Yes. Repair and service visits are charged at the rate we give you when you book. Surveys for new installations are free.