Motor replacement for properties in Coatbridge
Visits to Coatbridge and the surrounding area are arranged directly with you, as part of our coverage across Lanarkshire. Visits can also be arranged in Airdrie, Motherwell and Cumbernauld, so several sites can be booked together.
Coatbridge sits some 9 miles to the north-east of East Kilbride.
If a shutter in Coatbridge is no longer worth repairing, we will say so and price a replacement curtain or motor instead of a repeat visit.
A motor that hums but does not turn, a shutter that stops part-way or a remote that has stopped working can all be diagnosed on site in Coatbridge.
What roller shutter motor replacement can cover in Coatbridge
What we look at on a visit in Coatbridge:
- IndustrialDirect-drive gear motors with emergency hand operation.
- DomesticTubular motors for window, door and garage shutters.
- ShopTube motors or external drives with key switch.
Guide prices for Coatbridge
| Roller shutter motor replacement | Inc VAT | Ex VAT |
|---|---|---|
| Domestic tubular motor | £295 – £595 | £245 – £495 |
| Shop or commercial tube motor | £715 – £1,435 | £595 – £1,195 |
| Industrial side-mounted gear motor | £1,075 – £2,275 | £895 – £1,895 |
Guide prices, per motor, supplied and fitted. VAT at 20% where it applies.
Use these to budget in Coatbridge; parts and any extra work are confirmed with you on the day before we go ahead.
What to check in Coatbridge before ordering
In Coatbridge, as elsewhere in Scotland, planning questions go to your planning authority (the local council, or a national park authority).
- Electrical work: Motors are wired to BS 7671; any change to the supply is done by a qualified electrician.
What happens next
Describe the problem
What the shutter is doing, what it is made of and roughly when it was fitted, with photos if possible.
Engineer visit
We inspect the shutter, controls and safety devices and confirm what is needed.
Cost agreed first
Anything beyond the visit is priced and agreed with you before the work is done.
Work done, report left
The shutter is tested after the work and you get a record of what was found and done.
Frequently asked questions
Can I replace the motor without replacing the shutter?
Yes, in most cases. The motor slides out of the barrel or unbolts from the side.
How do I know if my shutter motor has failed?
If the shutter hums but does not move, stops part way, or does nothing when the power and switch are fine, the motor or its limits are the likely cause. We test before replacing.
Do you cover Coatbridge?
Yes, we carry out roller shutter motor replacement in Coatbridge (ML5) as part of our Lanarkshire coverage.
Do you charge for a visit in Coatbridge?
Yes, visits for repairs and servicing are charged, and we tell you the cost before booking. New-installation surveys are free.