Our roller shutter motor replacement service in Hucknall
Hucknall is part of our Nottinghamshire coverage, and addresses in the NG15 postcode district are covered in the same way as the rest of Nottinghamshire. Other towns nearby that we cover include Arnold, Kirkby-in-Ashfield and Nottingham.
Hucknall sits some 6 miles to the north of Nottingham.
When a shutter in Hucknall fails, photos of the shutter, the box and any labels help us bring the likely parts on the first visit.
We work on most makes of domestic, shop and industrial shutter in Hucknall, including ones fitted by other companies.
What the work can involve
What we look at on a visit in Hucknall:
- ShopTube motors or external drives with key switch.
- IndustrialDirect-drive gear motors with emergency hand operation.
- DomesticTubular motors for window, door and garage shutters.
Guide prices for roller shutter motor replacement in Hucknall
| Roller shutter motor replacement | Inc VAT | Ex VAT |
|---|---|---|
| Domestic tubular motor | £295 – £595 | £245 – £495 |
| Shop or commercial tube motor | £715 – £1,435 | £595 – £1,195 |
| Industrial side-mounted gear motor | £1,075 – £2,275 | £895 – £1,895 |
Guide prices, per motor, supplied and fitted. VAT at 20% where it applies.
Use these to budget in Hucknall; parts and any extra work are confirmed with you on the day before we go ahead.
Planning and safety in Hucknall
Hucknall is in England, so planning decisions sit with your local planning authority (the district, borough, city or unitary council).
- Electrical work: Motors are wired to BS 7671; any change to the supply is done by a qualified electrician.
What happens next
Describe the problem
What the shutter is doing, what it is made of and roughly when it was fitted, with photos if possible.
Engineer visit
We inspect the shutter, controls and safety devices and confirm what is needed.
Your go-ahead
You approve any parts or extra work before we carry it out.
Work done, report left
The shutter is tested after the work and you get a record of what was found and done.
Questions about roller shutter motor replacement in Hucknall
How do I know if my shutter motor has failed?
If the shutter hums but does not move, stops part way, or does nothing when the power and switch are fine, the motor or its limits are the likely cause. We test before replacing.
Can I replace the motor without replacing the shutter?
Yes, in most cases. The motor slides out of the barrel or unbolts from the side.
Do you charge for a visit in Hucknall?
Yes. Repair and service visits are charged at the rate we give you when you book. Surveys for new installations are free.
Do you work on shutters fitted by other companies?
Yes. We work on most makes of domestic, shop and industrial roller shutter, wherever they came from.