Call free 0800 088 6248
Rollershutters-UKHomes · Shops · Industry
Wiltshire · SN1

Roller shutter motor replacement in Swindon

Roller shutter motor replacement in Swindon: we diagnose the fault, bring the likely parts and tell you the cost before going further.

Roller shutter motor replacement means removing a failed or worn motor and fitting a new one matched to the curtain's weight and barrel, then setting the open and closed limits and testing the safety devices. We carry out this work in Swindon and the SN1 postcode district as part of our coverage across Wiltshire.

From £295 inc VAT

Book a motor replacement visitVisit cost agreed first
Please choose an option.
Enter a valid UK postcode.
Enter a phone number we can call.
Please enter your name.
Check the email address.

We use your details only to reply to this enquiry. See our privacy notice.

Motor replacement for properties in Swindon

Swindon is part of our Wiltshire coverage, and addresses in the SN1 postcode district are covered in the same way as the rest of Wiltshire. We also carry out roller shutter motor replacement in Cirencester, Chippenham and Witney.

A motor that hums but does not turn, a shutter that stops part-way or a remote that has stopped working can all be diagnosed on site in Swindon.

In Swindon, as everywhere, a jammed or dropped shutter should not be forced; keep people clear and call us so it can be made safe.

Faults and work we handle in Swindon

What roller shutter motor replacement in Swindon can cover:

  • DomesticTubular motors for window, door and garage shutters.
  • IndustrialDirect-drive gear motors with emergency hand operation.
  • ShopTube motors or external drives with key switch.

Prices for roller shutter motor replacement in Swindon

Roller shutter motor replacementInc VATEx VAT
Domestic tubular motor£295 – £595£245 – £495
Shop or commercial tube motor£715 – £1,435£595 – £1,195
Industrial side-mounted gear motor£1,075 – £2,275£895 – £1,895

Guide prices, per motor, supplied and fitted. VAT at 20% where it applies.

Use these to budget in Swindon; parts and any extra work are confirmed with you on the day before we go ahead.

Planning and safety in Swindon

Swindon is in England, so planning decisions sit with your local planning authority (the district, borough, city or unitary council).

  • Electrical work: Motors are wired to BS 7671; any change to the supply is done by a qualified electrician.

What happens next

  1. Describe the problem

    What the shutter is doing, what it is made of and roughly when it was fitted, with photos if possible.

  2. Engineer visit

    We inspect the shutter, controls and safety devices and confirm what is needed.

  3. Cost agreed first

    Anything beyond the visit is priced and agreed with you before the work is done.

  4. Fixed and reported

    We complete the work, test the shutter and leave a short written report.

Frequently asked questions

Can I replace the motor without replacing the shutter?

Yes, in most cases. The motor slides out of the barrel or unbolts from the side.

How do I know if my shutter motor has failed?

If the shutter hums but does not move, stops part way, or does nothing when the power and switch are fine, the motor or its limits are the likely cause. We test before replacing.

Do you charge for a visit in Swindon?

Yes. Repair and service visits are charged at the rate we give you when you book. Surveys for new installations are free.

Do you work on shutters fitted by other companies?

Yes, most makes and ages of shutter; photos and any labels help us bring the right parts to Swindon.

Get a fixed price for your shutters

Free survey for new installations, a written fixed price, and fitting across the UK.

Call freeGet a quote