Our counter & servery shutters service in Banbridge
Banbridge is roughly 33 miles south-west of Bangor.
For offices, units and service counters in Banbridge, counter & servery shutters are chosen for how often they run, how they are controlled and who needs access.
Where a counter shutter sits in a fire-resisting wall in a building in Banbridge, it needs to be a fire-rated product chosen to match the fire strategy.
We survey and install across County Down, and Banbridge is one of the towns covered. Neighbouring towns we cover include Newry (10 miles away), Lurgan and Craigavon.
What can you choose in Banbridge?
The main choices for counter & servery shutters in Banbridge:
- OperationManual with a spring balance, or electric with a key switch.
- FinishAnodised aluminium, stainless steel or a powder-coated colour.
- LockingBottom-rail lock or motor lock.
Guide prices for counter & servery shutters in Banbridge
| Counter & servery shutters | Ex VAT | Inc VAT |
|---|---|---|
| Servery up to 2,000 × 1,000 mm, manual | £695 – £1,195 | £835 – £1,435 |
| Servery up to 3,000 × 1,200 mm, electric | £1,195 – £1,995 | £1,435 – £2,395 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
Guide prices, per shutter, supplied and fitted. VAT at 20% where it applies.
Use these as a starting point for budgeting in Banbridge; the written quotation after survey is the price that counts.
What to check in Banbridge before ordering
Banbridge is in Northern Ireland, so planning decisions sit with your local council, which has been the planning authority since 2015.
- Hygiene: In food areas, choose finishes that are easy to clean and keep the bottom rail clear of food prep.
- Fire separation: If the hatch breaks a fire-resisting wall, the shutter must be a tested fire-rated product installed to the manufacturer's instructions; a standard counter shutter will not do.
- Approvals: Where a fire-rated counter shutter is part of building work, such as a new hatch in a fire-resisting wall, building regulations approval is needed from council building control.
What happens next
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
Fixed written price
You get a quotation listing the shutter, controls, fitting and lead time.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Counter & servery shutters in Banbridge: questions
What finish is best for kitchens?
Stainless steel or anodised aluminium are easy to wipe down and resist corrosion.
Do I need a fire-rated counter shutter?
If the hatch is in a wall that is meant to resist fire, such as a kitchen wall onto a corridor, yes. Your fire risk assessment or building drawings will usually say.
Do I need permission for counter & servery shutters in Banbridge?
It depends on the property. New external shutters on street-facing elevations usually need planning permission; internal counter shutters usually do not. Check with your local council before ordering; we can supply drawings.
Do you cover Banbridge?
Yes. Book a survey for any address in Banbridge in the usual way; it is covered as part of County Down.