Counter & servery shutters in Romford
Romford is part of our Greater London coverage, and addresses in the RM1 postcode district are covered in the same way as the rest of Greater London. Hornchurch, Dagenham and Ilford are covered too, which helps when several properties need doing.
Romford is roughly 14 miles east of central London.
Work at occupied premises in Romford is planned around opening hours, so fitting causes as little disruption as possible.
For offices, units and service counters in Romford, counter & servery shutters are chosen for how often they run, how they are controlled and who needs access.
What can you choose in Romford?
Ways to specify counter & servery shutters for Romford:
- OperationManual with a spring balance, or electric with a key switch.
- Fire ratingFire-rated counter shutters for hatches in fire-resisting walls.
- FinishAnodised aluminium, stainless steel or a powder-coated colour.
Prices for counter & servery shutters in Romford
| Counter & servery shutters | Ex VAT | Inc VAT |
|---|---|---|
| Servery up to 2,000 × 1,000 mm, manual | £695 – £1,195 | £835 – £1,435 |
| Servery up to 3,000 × 1,200 mm, electric | £1,195 – £1,995 | £1,435 – £2,395 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
Guide prices, per shutter, supplied and fitted. VAT at 20% where it applies.
These are UK guide prices for supply and fit. Your price in Romford is fixed in writing after survey.
What to check in Romford before ordering
Romford is in England, so planning decisions sit with your local planning authority (the district, borough, city or unitary council).
- Fire separation: If the hatch breaks a fire-resisting wall, the shutter must be a tested fire-rated product installed to the manufacturer's instructions; a standard counter shutter will not do.
- Hygiene: In food areas, choose finishes that are easy to clean and keep the bottom rail clear of food prep.
- Approvals: Where a fire-rated counter shutter is part of building work, such as a new hatch in a fire-resisting wall, building control approval is needed, from the council or a registered building control approver.
From survey to fitting
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Free survey
We measure the opening and the space around it, and check fixings and power.
Price in writing
A fixed price for the work described, with the lead time stated.
Made, fitted, handed over
Your shutter is made to measure, fitted, set up and demonstrated.
Frequently asked questions
What finish is best for kitchens?
Stainless steel or anodised aluminium are easy to wipe down and resist corrosion.
Do I need a fire-rated counter shutter?
If the hatch is in a wall that is meant to resist fire, such as a kitchen wall onto a corridor, yes. Your fire risk assessment or building drawings will usually say.
Do I need permission for counter & servery shutters in Romford?
Possibly. New external shutters on street-facing elevations usually need planning permission; internal counter shutters usually do not. We recommend checking with your local council first.
How much do counter & servery shutters cost in Romford?
We use the same UK guide prices in Romford; after the survey you get a fixed written price for your opening.