Our fire-rated roller shutters service in Ampthill
If your address has an MK45 postcode, it falls within our Bedfordshire coverage. Neighbouring towns we cover include Bedford (8 miles away), Dunstable and Leighton Buzzard.
For reference, Ampthill lies about 11 miles north of Luton.
Fire shutters for buildings in Ampthill are specified from the fire strategy: the rating, the release method and how the shutter links to the alarm.
Where a fire shutter is part of new building work in Ampthill, the approval route and the product evidence are confirmed before anything is ordered.
Options for fire-rated roller shutters in Ampthill
Decisions we make with you at the survey in Ampthill:
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
Guide prices for fire-rated roller shutters in Ampthill
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
These are UK guide prices for supply and fit. Your price in Ampthill is fixed in writing after survey.
Planning and safety in Ampthill
Ampthill is in England, so planning decisions sit with your local planning authority (the district, borough, city or unitary council).
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
From survey to fitting
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
Price in writing
A fixed price for the work described, with the lead time stated.
Made, fitted, handed over
Your shutter is made to measure, fitted, set up and demonstrated.
Frequently asked questions
What does a fire rating mean?
It is the time the tested shutter held back fire in a standard furnace test. The rating applies to the tested product installed as its manufacturer specifies.
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
Do you cover Ampthill?
Yes. Book a survey for any address in Ampthill in the usual way; it is covered as part of Bedfordshire.
Do I need permission for fire-rated roller shutters in Ampthill?
A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). If you are unsure, ask your local council; we provide product details for any application.