Fitting fire-rated roller shutters in Cambridge
We cover Cambridge and the CB1 postcode district as part of Cambridgeshire; you book a survey here exactly as you would anywhere else. Newmarket, Ely and Huntingdon are covered too, which helps when several properties need doing.
For reference, Cambridge lies about 30 miles south-east of Peterborough.
The fire rating belongs to the manufacturer's tested product, so every fire shutter we quote in Cambridge comes with that product's test evidence.
Conveyor openings, kitchen hatches and doors between warehouse compartments are typical places a fire shutter is needed in commercial buildings in Cambridge.
What can you choose in Cambridge?
Ways to specify fire-rated roller shutters for Cambridge:
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
Guide prices for fire-rated roller shutters in Cambridge
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Prices are typical for the UK and apply in Cambridge too; the survey confirms the size and specification before you get a fixed price.
Rules that apply in Cambridge
Cambridge is in England, so planning decisions sit with your local planning authority (the district, borough, city or unitary council).
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
From survey to fitting
Tell us about the opening
Use the quote tool or the form: the type of shutter, rough sizes and any photos.
Survey at the property
A surveyor measures, checks what the box and guides will fix to, and talks through options.
Price in writing
A fixed price for the work described, with the lead time stated.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Questions about fire-rated roller shutters in Cambridge
Who is responsible for maintaining fire shutters?
The person responsible for fire safety in the building: the responsible person in England and Wales, the duty holder in Scotland or the appropriate person in Northern Ireland.
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
How much do fire-rated roller shutters cost in Cambridge?
We use the same UK guide prices in Cambridge; after the survey you get a fixed written price for your opening.
Is the survey free in Cambridge?
For new shutters, yes. Repair visits in Cambridge are charged because they include diagnosis and work on the day.