Fire-rated roller shutters in Mold
Surveys in Mold and the surrounding area are arranged directly with you, as part of our coverage across Clwyd. Buckley, Flint and Deeside are covered too, which helps when several properties need doing.
Mold sits some 11 miles to the north-west of Wrexham.
The fire rating belongs to the manufacturer's tested product, so every fire shutter we quote in Mold comes with that product's test evidence.
We work with your fire alarm contractor in Mold so the shutter closes on the right signal and the interface is tested at handover.
Options for fire-rated roller shutters in Mold
What you can choose when we survey in Mold:
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
Prices for fire-rated roller shutters in Mold
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Use these as a starting point for budgeting in Mold; the written quotation after survey is the price that counts.
Planning and safety in Mold
Mold is in Wales, so planning decisions sit with your local planning authority (the county or county borough council, or a national park authority).
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building regulations approval is needed from local authority building control.
How it works in Mold
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
Price in writing
A fixed price for the work described, with the lead time stated.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Fire-rated roller shutters in Mold: questions
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
What does a fire rating mean?
It is the time the tested shutter held back fire in a standard furnace test. The rating applies to the tested product installed as its manufacturer specifies.
How much do fire-rated roller shutters cost in Mold?
Typical prices are shown above. A survey at your property in Mold confirms the specification and fixes the price.
Do you cover Mold?
Yes. Book a survey for any address in Mold in the usual way; it is covered as part of Clwyd.