Fire-rated roller shutters in Bodmin
We survey and install across Cornwall, and Bodmin is one of the towns covered. Our coverage around Bodmin also includes St Austell, Newquay and Truro.
Bodmin sits some 20 miles to the north-east of Truro.
Where a fire shutter is part of new building work in Bodmin, the approval route and the product evidence are confirmed before anything is ordered.
We work with your fire alarm contractor in Bodmin so the shutter closes on the right signal and the interface is tested at handover.
What can you choose in Bodmin?
Options we specify for properties in Bodmin:
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
Guide prices for fire-rated roller shutters in Bodmin
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Guide prices only: access, fixings, power and finish at your property in Bodmin can move the figure up or down, and the survey settles it.
Rules that apply in Bodmin
Bodmin is in England, so planning decisions sit with your local planning authority (the district, borough, city or unitary council).
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
From survey to fitting
Tell us about the opening
Use the quote tool or the form: the type of shutter, rough sizes and any photos.
Survey at the property
A surveyor measures, checks what the box and guides will fix to, and talks through options.
Fixed written price
You get a quotation listing the shutter, controls, fitting and lead time.
Installation and handover
We fit, test the controls and safety devices, and leave the documents with you.
Frequently asked questions
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
Do you cover Bodmin?
Yes, we survey and fit in Bodmin (PL31) as part of our Cornwall coverage.
Is the survey free in Bodmin?
Yes, surveys for new installations in Bodmin are free. Repair and service visits are charged.