Fire-rated roller shutters in Banbridge
Banbridge is part of our County Down coverage, and addresses in the BT32 postcode district are covered in the same way as the rest of County Down. Our coverage around Banbridge also includes Newry, Lurgan and Craigavon.
Banbridge is roughly 33 miles south-west of Bangor.
We work with your fire alarm contractor in Banbridge so the shutter closes on the right signal and the interface is tested at handover.
The fire rating belongs to the manufacturer's tested product, so every fire shutter we quote in Banbridge comes with that product's test evidence.
Which options suit you?
What you can choose when we survey in Banbridge:
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
Guide prices for Banbridge
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Guide prices only: access, fixings, power and finish at your property in Banbridge can move the figure up or down, and the survey settles it.
Planning and safety in Banbridge
In Banbridge, planning follows the Planning Act (Northern Ireland) 2011 and the NI permitted development rules.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building regulations approval is needed from council building control.
- Your duties: In Northern Ireland, the appropriate person under the Fire and Rescue Services (NI) Order 2006 and the Fire Safety Regulations (NI) 2010 must keep fire safety measures maintained.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
How it works in Banbridge
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Survey at the property
A surveyor measures, checks what the box and guides will fix to, and talks through options.
One clear quotation
Everything included is listed, and nothing is ordered until you accept.
Installation and handover
We fit, test the controls and safety devices, and leave the documents with you.
Questions about fire-rated roller shutters in Banbridge
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
Do I need permission for fire-rated roller shutters in Banbridge?
Possibly. A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). We recommend checking with your local council first.
How much do fire-rated roller shutters cost in Banbridge?
Typical prices are shown above. A survey at your property in Banbridge confirms the specification and fixes the price.