Fitting fire-rated roller shutters in Darlington
Whether your property is in the centre of Darlington or on its edges, it is included in our County Durham coverage. Neighbouring towns we cover include Newton Aycliffe (7 miles away), Stockton-on-Tees and Thornaby-on-Tees.
Darlington is roughly 17 miles south of Durham.
If a fire shutter at your premises in Darlington has not been drop-tested in the last year, a service visit can check it, record the result and tell you what it needs.
The fire rating belongs to the manufacturer's tested product, so every fire shutter we quote in Darlington comes with that product's test evidence.
What can you choose in Darlington?
What you can choose when we survey in Darlington:
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
Prices for fire-rated roller shutters in Darlington
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Use these as a starting point for budgeting in Darlington; the written quotation after survey is the price that counts.
Planning and safety in Darlington
As an English town, Darlington follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
How it works in Darlington
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Free survey
We measure the opening and the space around it, and check fixings and power.
Price in writing
A fixed price for the work described, with the lead time stated.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Frequently asked questions
What does a fire rating mean?
It is the time the tested shutter held back fire in a standard furnace test. The rating applies to the tested product installed as its manufacturer specifies.
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
Is the survey free in Darlington?
Yes, surveys for new installations in Darlington are free. Repair and service visits are charged.
How much do fire-rated roller shutters cost in Darlington?
We use the same UK guide prices in Darlington; after the survey you get a fixed written price for your opening.