Fitting fire-rated roller shutters in Ripley
For reference, Ripley lies about 8 miles north-east of Derby.
If a fire shutter at your premises in Ripley has not been drop-tested in the last year, a service visit can check it, record the result and tell you what it needs.
We work with your fire alarm contractor in Ripley so the shutter closes on the right signal and the interface is tested at handover.
If your address has a DE5 postcode, it falls within our Derbyshire coverage. We also cover Heanor, Belper and Alfreton, so premises in more than one of these places can be quoted together.
Specifying fire-rated roller shutters for Ripley
Ways to specify fire-rated roller shutters for Ripley:
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
Prices for fire-rated roller shutters in Ripley
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Use these as a starting point for budgeting in Ripley; the written quotation after survey is the price that counts.
Planning and safety in Ripley
Ripley is in England, so planning decisions sit with your local planning authority (the district, borough, city or unitary council).
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
What happens next
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
Fixed written price
You get a quotation listing the shutter, controls, fitting and lead time.
Installation and handover
We fit, test the controls and safety devices, and leave the documents with you.
Questions about fire-rated roller shutters in Ripley
Who is responsible for maintaining fire shutters?
The person responsible for fire safety in the building: the responsible person in England and Wales, the duty holder in Scotland or the appropriate person in Northern Ireland.
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
Do I need permission for fire-rated roller shutters in Ripley?
A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). If you are unsure, ask your local council; we provide product details for any application.
Is the survey free in Ripley?
Yes, for new installations. We tell you the cost of any repair or service visit before booking.