Fitting fire-rated roller shutters in Poole
We survey and install across Dorset, and Poole is one of the towns covered. We also cover Bournemouth, Christchurch and New Milton, so premises in more than one of these places can be quoted together.
For reference, Poole lies about 5 miles west of Bournemouth.
Where a fire shutter is part of new building work in Poole, the approval route and the product evidence are confirmed before anything is ordered.
If a fire shutter at your premises in Poole has not been drop-tested in the last year, a service visit can check it, record the result and tell you what it needs.
Options for fire-rated roller shutters in Poole
The main choices for fire-rated roller shutters in Poole:
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
Prices for fire-rated roller shutters in Poole
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Prices are typical for the UK and apply in Poole too; the survey confirms the size and specification before you get a fixed price.
Planning and safety in Poole
As an English town, Poole follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
From survey to fitting
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Survey at the property
A surveyor measures, checks what the box and guides will fix to, and talks through options.
Price in writing
A fixed price for the work described, with the lead time stated.
Made, fitted, handed over
Your shutter is made to measure, fitted, set up and demonstrated.
Fire-rated roller shutters in Poole: questions
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
Do you cover Poole?
Yes. Poole and the BH15 postcode district are part of our coverage across Dorset.
Is the survey free in Poole?
Yes, for new installations. We tell you the cost of any repair or service visit before booking.