Fire-rated roller shutters in Rayleigh
Rayleigh is roughly 12 miles south-east of Chelmsford.
Conveyor openings, kitchen hatches and doors between warehouse compartments are typical places a fire shutter is needed in commercial buildings in Rayleigh.
Where a fire shutter is part of new building work in Rayleigh, the approval route and the product evidence are confirmed before anything is ordered.
Surveys in Rayleigh and the surrounding area are arranged directly with you, as part of our coverage across Essex. We also cover Benfleet, Wickford and Pitsea, so premises in more than one of these places can be quoted together.
Which options suit you?
Ways to specify fire-rated roller shutters for Rayleigh:
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
Guide prices for Rayleigh
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Guide prices only: access, fixings, power and finish at your property in Rayleigh can move the figure up or down, and the survey settles it.
What to check in Rayleigh before ordering
In Rayleigh, as elsewhere in England, planning questions go to your local planning authority (the district, borough, city or unitary council).
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
How it works in Rayleigh
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
One clear quotation
Everything included is listed, and nothing is ordered until you accept.
Made, fitted, handed over
Your shutter is made to measure, fitted, set up and demonstrated.
Frequently asked questions
Who is responsible for maintaining fire shutters?
The person responsible for fire safety in the building: the responsible person in England and Wales, the duty holder in Scotland or the appropriate person in Northern Ireland.
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
Is the survey free in Rayleigh?
For new shutters, yes. Repair visits in Rayleigh are charged because they include diagnosis and work on the day.
Do I need permission for fire-rated roller shutters in Rayleigh?
A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). If you are unsure, ask your local council; we provide product details for any application.