Fitting fire-rated roller shutters in Barnet
Whether your property is in the centre of Barnet or on its edges, it is included in our Greater London coverage. Neighbouring towns we cover include Potters Bar (3 miles away), Borehamwood and Finchley.
Barnet is roughly 10 miles north of central London.
Where a fire shutter is part of new building work in Barnet, the approval route and the product evidence are confirmed before anything is ordered.
The fire rating belongs to the manufacturer's tested product, so every fire shutter we quote in Barnet comes with that product's test evidence.
Which options suit you?
The main choices for fire-rated roller shutters in Barnet:
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
Guide prices for Barnet
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Prices are typical for the UK and apply in Barnet too; the survey confirms the size and specification before you get a fixed price.
Planning and safety in Barnet
As an English town, Barnet follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
How it works in Barnet
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Survey at the property
A surveyor measures, checks what the box and guides will fix to, and talks through options.
Price in writing
A fixed price for the work described, with the lead time stated.
Installation and handover
We fit, test the controls and safety devices, and leave the documents with you.
Frequently asked questions
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
Is the survey free in Barnet?
For new shutters, yes. Repair visits in Barnet are charged because they include diagnosis and work on the day.
How much do fire-rated roller shutters cost in Barnet?
We use the same UK guide prices in Barnet; after the survey you get a fixed written price for your opening.