Fitting fire-rated roller shutters in Islington
We survey and install across Greater London, and Islington is one of the towns covered. Our coverage around Islington also includes Highbury, Holloway and Camden Town.
For reference, Islington lies about 2 miles north-east of central London.
Where a fire shutter is part of new building work in Islington, the approval route and the product evidence are confirmed before anything is ordered.
The fire rating belongs to the manufacturer's tested product, so every fire shutter we quote in Islington comes with that product's test evidence.
Specifying fire-rated roller shutters for Islington
The main choices for fire-rated roller shutters in Islington:
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
Guide prices for Islington
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
These are UK guide prices for supply and fit. Your price in Islington is fixed in writing after survey.
Rules that apply in Islington
As an English town, Islington follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
From survey to fitting
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Free survey
We measure the opening and the space around it, and check fixings and power.
Fixed written price
You get a quotation listing the shutter, controls, fitting and lead time.
Made, fitted, handed over
Your shutter is made to measure, fitted, set up and demonstrated.
Frequently asked questions
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
Is the survey free in Islington?
Yes, for new installations. We tell you the cost of any repair or service visit before booking.
How much do fire-rated roller shutters cost in Islington?
Typical prices are shown above. A survey at your property in Islington confirms the specification and fixes the price.