Fitting fire-rated roller shutters in New Malden
Whether your property is in the centre of New Malden or on its edges, it is included in our Greater London coverage. We also cover Surbiton, Kingston upon Thames and Morden, so premises in more than one of these places can be quoted together.
For reference, New Malden lies about 9 miles south-west of central London.
Conveyor openings, kitchen hatches and doors between warehouse compartments are typical places a fire shutter is needed in commercial buildings in New Malden.
Where a fire shutter is part of new building work in New Malden, the approval route and the product evidence are confirmed before anything is ordered.
What can you choose in New Malden?
Ways to specify fire-rated roller shutters for New Malden:
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
Prices for fire-rated roller shutters in New Malden
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Use these as a starting point for budgeting in New Malden; the written quotation after survey is the price that counts.
What to check in New Malden before ordering
As an English town, New Malden follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
From survey to fitting
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Survey at the property
A surveyor measures, checks what the box and guides will fix to, and talks through options.
Fixed written price
You get a quotation listing the shutter, controls, fitting and lead time.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Frequently asked questions
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
What does a fire rating mean?
It is the time the tested shutter held back fire in a standard furnace test. The rating applies to the tested product installed as its manufacturer specifies.
Is the survey free in New Malden?
For new shutters, yes. Repair visits in New Malden are charged because they include diagnosis and work on the day.
Do I need permission for fire-rated roller shutters in New Malden?
Possibly. A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). We recommend checking with your local council first.