Our fire-rated roller shutters service in Purley
Surveys in Purley and the surrounding area are arranged directly with you, as part of our coverage across Greater London. Other towns nearby that we cover include Coulsdon, South Croydon and Wallington.
For reference, Purley lies about 12 miles south of central London.
We work with your fire alarm contractor in Purley so the shutter closes on the right signal and the interface is tested at handover.
The fire rating belongs to the manufacturer's tested product, so every fire shutter we quote in Purley comes with that product's test evidence.
What can you choose in Purley?
What you can choose when we survey in Purley:
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
Guide prices for Purley
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Guide prices only: access, fixings, power and finish at your property in Purley can move the figure up or down, and the survey settles it.
Planning and safety in Purley
In Purley, as elsewhere in England, planning questions go to your local planning authority (the district, borough, city or unitary council).
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
From survey to fitting
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
One clear quotation
Everything included is listed, and nothing is ordered until you accept.
Installation and handover
We fit, test the controls and safety devices, and leave the documents with you.
Frequently asked questions
What does a fire rating mean?
It is the time the tested shutter held back fire in a standard furnace test. The rating applies to the tested product installed as its manufacturer specifies.
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
Do I need permission for fire-rated roller shutters in Purley?
It depends on the property. A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). Check with your local council before ordering; we can supply drawings.
Do you cover Purley?
Yes. Purley and the CR8 postcode district are part of our coverage across Greater London.