Fire-rated roller shutters in Ruislip
We survey and install across Greater London, and Ruislip is one of the towns covered. We also cover Northolt, Uxbridge and Harrow, so premises in more than one of these places can be quoted together.
For reference, Ruislip lies about 14 miles west of central London.
Fire shutters for buildings in Ruislip are specified from the fire strategy: the rating, the release method and how the shutter links to the alarm.
We work with your fire alarm contractor in Ruislip so the shutter closes on the right signal and the interface is tested at handover.
Options for fire-rated roller shutters in Ruislip
Ways to specify fire-rated roller shutters for Ruislip:
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
Prices for fire-rated roller shutters in Ruislip
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Use these as a starting point for budgeting in Ruislip; the written quotation after survey is the price that counts.
Rules that apply in Ruislip
In Ruislip, as elsewhere in England, planning questions go to your local planning authority (the district, borough, city or unitary council).
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
How it works in Ruislip
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
Price in writing
A fixed price for the work described, with the lead time stated.
Installation and handover
We fit, test the controls and safety devices, and leave the documents with you.
Fire-rated roller shutters in Ruislip: questions
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
What does a fire rating mean?
It is the time the tested shutter held back fire in a standard furnace test. The rating applies to the tested product installed as its manufacturer specifies.
How much do fire-rated roller shutters cost in Ruislip?
Typical prices are shown above. A survey at your property in Ruislip confirms the specification and fixes the price.
Do I need permission for fire-rated roller shutters in Ruislip?
Possibly. A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). We recommend checking with your local council first.