Fire-rated roller shutters in Sutton
We cover Sutton and the SM1 postcode district as part of Greater London; you book a survey here exactly as you would anywhere else. Neighbouring towns we cover include Carshalton (2 miles away), Banstead and Ewell.
Sutton is roughly 11 miles south of central London.
We work with your fire alarm contractor in Sutton so the shutter closes on the right signal and the interface is tested at handover.
Fire shutters for buildings in Sutton are specified from the fire strategy: the rating, the release method and how the shutter links to the alarm.
What can you choose in Sutton?
Decisions we make with you at the survey in Sutton:
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
Guide prices for Sutton
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
These are UK guide prices for supply and fit. Your price in Sutton is fixed in writing after survey.
Rules that apply in Sutton
As an English town, Sutton follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
From survey to fitting
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
Price in writing
A fixed price for the work described, with the lead time stated.
Installation and handover
We fit, test the controls and safety devices, and leave the documents with you.
Frequently asked questions
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
Do you cover Sutton?
Yes. Book a survey for any address in Sutton in the usual way; it is covered as part of Greater London.
Do I need permission for fire-rated roller shutters in Sutton?
A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). If you are unsure, ask your local council; we provide product details for any application.