Fitting fire-rated roller shutters in Welling
Surveys in Welling and the surrounding area are arranged directly with you, as part of our coverage across Greater London. We also cover Bexley, Eltham and Thamesmead, so premises in more than one of these places can be quoted together.
Welling is roughly 11 miles east of central London.
We work with your fire alarm contractor in Welling so the shutter closes on the right signal and the interface is tested at handover.
If a fire shutter at your premises in Welling has not been drop-tested in the last year, a service visit can check it, record the result and tell you what it needs.
What can you choose in Welling?
Options we specify for properties in Welling:
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
Guide prices for fire-rated roller shutters in Welling
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
These are UK guide prices for supply and fit. Your price in Welling is fixed in writing after survey.
What to check in Welling before ordering
In Welling, as elsewhere in England, planning questions go to your local planning authority (the district, borough, city or unitary council).
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
What happens next
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Free survey
We measure the opening and the space around it, and check fixings and power.
One clear quotation
Everything included is listed, and nothing is ordered until you accept.
Installation and handover
We fit, test the controls and safety devices, and leave the documents with you.
Frequently asked questions
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
How much do fire-rated roller shutters cost in Welling?
The guide prices above apply in Welling. Your exact price depends on size, finish, controls and access, and is fixed in writing after survey.
Do I need permission for fire-rated roller shutters in Welling?
Possibly. A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). We recommend checking with your local council first.