Fire shutters for properties in Hyde
We survey and install across Greater Manchester, and Hyde is one of the towns covered. Neighbouring towns we cover include Denton (2 miles away), Dukinfield and Stalybridge.
Hyde is roughly 7 miles east of Manchester.
Fire shutters for buildings in Hyde are specified from the fire strategy: the rating, the release method and how the shutter links to the alarm.
The fire rating belongs to the manufacturer's tested product, so every fire shutter we quote in Hyde comes with that product's test evidence.
Which options suit you?
Options we specify for properties in Hyde:
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
Prices for fire-rated roller shutters in Hyde
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
These are UK guide prices for supply and fit. Your price in Hyde is fixed in writing after survey.
Planning and safety in Hyde
As an English town, Hyde follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
How it works in Hyde
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Free survey
We measure the opening and the space around it, and check fixings and power.
One clear quotation
Everything included is listed, and nothing is ordered until you accept.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Fire-rated roller shutters in Hyde: questions
Who is responsible for maintaining fire shutters?
The person responsible for fire safety in the building: the responsible person in England and Wales, the duty holder in Scotland or the appropriate person in Northern Ireland.
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
How much do fire-rated roller shutters cost in Hyde?
The guide prices above apply in Hyde. Your exact price depends on size, finish, controls and access, and is fixed in writing after survey.
Is the survey free in Hyde?
Yes, for new installations. We tell you the cost of any repair or service visit before booking.