Fitting fire-rated roller shutters in Westhoughton
For reference, Westhoughton lies about 13 miles west of Manchester.
Conveyor openings, kitchen hatches and doors between warehouse compartments are typical places a fire shutter is needed in commercial buildings in Westhoughton.
We work with your fire alarm contractor in Westhoughton so the shutter closes on the right signal and the interface is tested at handover.
Surveys in Westhoughton and the surrounding area are arranged directly with you, as part of our coverage across Greater Manchester. Neighbouring towns we cover include Atherton (2 miles away), Hindley and Tyldesley.
What can you choose in Westhoughton?
Ways to specify fire-rated roller shutters for Westhoughton:
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
Guide prices for fire-rated roller shutters in Westhoughton
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Guide prices only: access, fixings, power and finish at your property in Westhoughton can move the figure up or down, and the survey settles it.
Rules that apply in Westhoughton
Westhoughton is in England, so planning decisions sit with your local planning authority (the district, borough, city or unitary council).
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
What happens next
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Free survey
We measure the opening and the space around it, and check fixings and power.
Fixed written price
You get a quotation listing the shutter, controls, fitting and lead time.
Made, fitted, handed over
Your shutter is made to measure, fitted, set up and demonstrated.
Frequently asked questions
What does a fire rating mean?
It is the time the tested shutter held back fire in a standard furnace test. The rating applies to the tested product installed as its manufacturer specifies.
Who is responsible for maintaining fire shutters?
The person responsible for fire safety in the building: the responsible person in England and Wales, the duty holder in Scotland or the appropriate person in Northern Ireland.
Is the survey free in Westhoughton?
Yes, for new installations. We tell you the cost of any repair or service visit before booking.
Do I need permission for fire-rated roller shutters in Westhoughton?
It depends on the property. A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). Check with your local council before ordering; we can supply drawings.