Fitting fire-rated roller shutters in Lerwick
Lerwick is an island town, so work there is arranged in advance around ferry travel, with surveys and installation scheduled together where possible and travel costs quoted up front.
Fire shutters for buildings in Lerwick are specified from the fire strategy: the rating, the release method and how the shutter links to the alarm.
Conveyor openings, kitchen hatches and doors between warehouse compartments are typical places a fire shutter is needed in commercial buildings in Lerwick.
Specifying fire-rated roller shutters for Lerwick
The main choices for fire-rated roller shutters in Lerwick:
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
Guide prices for fire-rated roller shutters in Lerwick
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Guide prices only: access, fixings, power and finish at your property in Lerwick can move the figure up or down, and the survey settles it.
Rules that apply in Lerwick
As a Scottish town, Lerwick follows the Town and Country Planning (Scotland) Act 1997 and the Scottish permitted development rules.
- Your duties: In Scotland, the duty holder under the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 must keep fire safety measures maintained.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, a building warrant from the council's building standards service is normally needed before work starts.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
From survey to fitting
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
One clear quotation
Everything included is listed, and nothing is ordered until you accept.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Fire-rated roller shutters in Lerwick: questions
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
What does a fire rating mean?
It is the time the tested shutter held back fire in a standard furnace test. The rating applies to the tested product installed as its manufacturer specifies.
Do I need permission for fire-rated roller shutters in Lerwick?
Possibly. A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). We recommend checking with your council first.
Do you cover Lerwick?
Yes, by arrangement. Lerwick is an island town, so visits are planned ahead around the crossing, and any travel cost is quoted in advance.