Fire-rated roller shutters across Isle of Wight
Fire-rated roller shutters for commercial and public buildings in Isle of Wight, measured on site and fitted to the survey.
We have local pages for 4 towns in Isle of Wight, starting with Newport (Isle of Wight). Neighbouring areas we also cover include Hampshire, Dorset, West Sussex.
The fire rating belongs to the manufacturer's tested product, so every fire shutter we quote in Isle of Wight comes with that product's test evidence.
Towns we cover in Isle of Wight include:
- Fire shutters in Ryde
- Fire shutters in Cowes
- Fire shutters in Sandown
- Fire shutters in Newport (Isle of Wight)
Options for fire-rated roller shutters in Isle of Wight
Decisions we make with you at the survey in Isle of Wight:
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
How much do fire-rated roller shutters cost in Isle of Wight?
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
These are UK guide prices for supply and fit. Your price in Isle of Wight is fixed in writing after survey.
Rules that apply in Isle of Wight
Across Isle of Wight, planning follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
How it works
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
One clear quotation
Everything included is listed, and nothing is ordered until you accept.
Installation and handover
We fit, test the controls and safety devices, and leave the documents with you.
Fire-rated roller shutters in Isle of Wight: questions
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
Who is responsible for maintaining fire shutters?
The person responsible for fire safety in the building: the responsible person in England and Wales, the duty holder in Scotland or the appropriate person in Northern Ireland.
Do I need permission for fire-rated roller shutters in Isle of Wight?
It depends on the property. A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). Check with your local council before ordering; we can supply drawings.
How much do fire-rated roller shutters cost in Isle of Wight?
Typical prices are shown above. A survey at your property in Isle of Wight confirms the specification and fixes the price.