Fitting fire-rated roller shutters in Deal
Deal sits some 38 miles to the east of Maidstone.
The fire rating belongs to the manufacturer's tested product, so every fire shutter we quote in Deal comes with that product's test evidence.
Fire shutters for buildings in Deal are specified from the fire strategy: the rating, the release method and how the shutter links to the alarm.
Deal is part of our Kent coverage, and addresses in the CT14 postcode district are covered in the same way as the rest of Kent. Our coverage around Deal also includes Dover, Ramsgate and Broadstairs.
What can you choose in Deal?
What you can choose when we survey in Deal:
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
Guide prices for Deal
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Use these as a starting point for budgeting in Deal; the written quotation after survey is the price that counts.
Rules that apply in Deal
Deal is in England, so planning decisions sit with your local planning authority (the district, borough, city or unitary council).
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
How it works in Deal
Tell us about the opening
Use the quote tool or the form: the type of shutter, rough sizes and any photos.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
Price in writing
A fixed price for the work described, with the lead time stated.
Installation and handover
We fit, test the controls and safety devices, and leave the documents with you.
Fire-rated roller shutters in Deal: questions
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
Do you cover Deal?
Yes. Book a survey for any address in Deal in the usual way; it is covered as part of Kent.
Do I need permission for fire-rated roller shutters in Deal?
It depends on the property. A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). Check with your local council before ordering; we can supply drawings.